Table of Contents
Advertisement
When upgrading the configuration from eight to 16x 2.5-inch HDDs/
SSDs, the OOB cable must be changed accordingly.
For the cable plan, see
Installing additional HDD/SSD modules
Figure 72: Removing the two HDD/SSD dummy covers
▶ Remove the two HDD/SSD dummy covers.
▶ Insert additional HDD/SSD modules, see
modules" on page
Concluding steps
▶
"Installing a riser module" on page
▶
"Installing the air duct 1 (top system board)" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If
applicable,"Installing the front cover with lock" on page
▶ Update the system information of your server using the Chassis ID Prom
Tool, see
"Using the Chassis ID Prom Tool" on page
corresponding system name.
RX4770 M6
Hard disk drive (HDD) / solid state disk (SSD)
"Appendix B" on page
142.
63.
53.
60.
Upgrade and Maintenance Manual
419.
"Installing 2.5-inch HDD/SSD
71.
59.
110. Select the
61.
161
Advertisement
Table of Contents
