Table of Contents
Advertisement
▶
"Resuming BitLocker functionality" on page
For CPU1 and CPU2 on the bottom system board:
▶
"Installing the air duct 2 (bottom system board)" on page
▶
"Installing the top system board carrier" on page
▶
"Installing the air duct 1 (top system board)" on page
▶
"Installing a riser module" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
When the system is powered on after a CPU has been replaced or
upgraded, the Global Error indicator will start flashing with the message
CPU has been changed.
This only indicates that the CPU configuration has been altered. There
is no technical problem.
Proceed as follows:
● Restart your server.
● As soon as the startup screen appears, press the [F2] function key to
enter the BIOS.
● If a password is assigned, enter the password and press [Enter].
● Select the Exit menu.
● Select Commit settings and Exit.
● Verify that the Global Error indicator stops flashing.
▶ If applicable,
"Installing the front cover with lock" on page
▶
"Resuming BitLocker functionality" on page
RX4770 M6
63.
53.
59.
60.
Upgrade and Maintenance Manual
Liquid cooling (LC)
104.
72.
76.
71.
61.
104.
297
Advertisement
Table of Contents
