Advertisement
6 Programless Communications
[0..89] in the data type indicates the first and last array numbers in the array variable.
Programless communications for E5 D Controllers use 30 words of PLC memory for each
−
Controller. If the first word is 0, then the last word is 30 x n
1.
Here, n is the number of E5 C Controllers used in the same programless communications.
Note: For details on array specifications, refer to the NJ/NX-series CPU Unit Software User's Manual (Cat. No.
W501).
(3) Transfer the project that was created on the Sysmac Studio to the PLC.
−
Select Controller
Online from the menu bar to go online and then select Controller-
−
Transfer
To Controller.
The Transfer to Controller Dialog Box will be displayed. Click the Execute Button to
transfer the project to the Controller.
A message saying that forced status will be canceled will be displayed. Click the Yes
Button.
If a dialog box that says execution ended normally is displayed, the transfer has been
concluded. Click the OK Button.
6 - 44
E5@D Digital Temperature Controllers Communications Manual (H225)
Advertisement
