Download
Share
Print this page
Omron E5CC-RX2ABM-000 Manual
  1. Manuals
  2. Brands
  3. Omron Manuals
  4. Temperature Controller
  5. E5CC-RX2ABM-000
  6. Manual
Omron E5CC-RX2ABM-000 Manual

Omron E5CC-RX2ABM-000 Manual

Digital temperature controller
Hide thumbs

Advertisement

Quick Links

Download this manual
We have 45,000 LP502030-PCM-NTC-LD-A02554 - EEMB - Lithium Battery Rectangular 3.7V 250mAh Rechargeable in
stock now. Starting at $0.034. This EEMB part is fully warrantied and traceable.
Looking for a discount?
Check out our current promotions!
This coversheet was created by Verical, a division of Arrow Electronics, Inc. ("Verical"). The attached document was created by the part supplier,
not Verical, and is provided strictly 'as is.' Verical, its subsidiaries, affiliates, employees, and agents make no representations or warranties
regarding the attached document and disclaim any liability for the consequences of relying on the information therein. All referenced brands,
product names, service names, and trademarks are the property of their respective owners.
00000005981LF-000
E5CC-RX2ABM-000
EOS Power
OMRON
Buy Now
Buy Now
Give us a call
1-855-837-4225
International: 1-555-555-5555
1-415-281-3866
1-415-281-3866
Arrow Electronics,
Arrow Electronics, Inc
Verical Division
9201 East Dry Creek Road
P.O. Box 740970
Centennial, CO 80112
Los Angeles, CA 90074-0970

Advertisement

loading
Need help?

Need help?

Do you have a question about the E5CC-RX2ABM-000 and is the answer not in the manual?

Questions and answers

Related Manuals for Omron E5CC-RX2ABM-000

Summary of Contents for Omron E5CC-RX2ABM-000

  • Page 1 We have 45,000 LP502030-PCM-NTC-LD-A02554 - EEMB - Lithium Battery Rectangular 3.7V 250mAh Rechargeable in stock now. Starting at $0.034. This EEMB part is fully warrantied and traceable. 00000005981LF-000 E5CC-RX2ABM-000 EOS Power OMRON Buy Now Buy Now Looking for a discount?

  • Page 2: New Product

    New Product Digital Temperature Controller E5@C/E5@C-T E5@C Series That Pursues Greater Visibility with Large White PV Display. Introducing Models with Push-In Plus Terminal Blocks for Unified Panel Solutions. Reduce Required Wiring Work. A Wide Lineup of Models to Meet a Wide Range of User Needs. Digital Temperature Controllers: E5@C Series Models with Screw Terminal Blocks/ 48 ×...
  • Page 3 • High-speed sampling at 50 ms. • Easy connections to a PLC with programless communications. Refer to your OMRON website for the most recent information on applicable safety standards. • Set up the Controller without wiring the power supply by connecting to the computer with a Communications Conversion Refer to Safety Precautions on 122.

  • Page 4: Model Number Legend

    E5GC Model Number Legend and Standard Models Model Number Legend E5GC-@@ @ @ @ M-@@@ (Example: E5GC-RX1A6M-015) −− − − − − −−− B C D E Control No. of Power Model Meaning Terminal Input outputs 1 auxiliary supply Options type type and 2...
  • Page 5 5.8 mm E54-CT1L* For the system requirements for the CX-Thermo, refer to 12.0 mm E54-CT3 information on the EST2-2C-MV4 on the OMRON website 12.0 mm E54-CT3L* (www.ia.omron.com). *Lead wires are included with these CTs. If UL certification is required, use these CTs.

  • Page 6: Specifications

    E5GC Specifications Ratings A in model number: 100 to 240 VAC, 50/60 Hz Power supply voltage D in model number: 24 VAC, 50/60 Hz; 24 VDC Operating voltage range 85 to 110% of rated supply voltage Power consumption 5.9 VA max. at 100 to 240 VAC, and 3.2 VA max. at 24 VAC or 1.8 W max. at 24 VDC Temperature input Thermocouple: K, J, T, E, L, U, N, R, S, B, C/W, or PL II Platinum resistance thermometer: Pt100 or JPt100...

  • Page 7: Input Ranges

    E5GC Input Ranges Thermocouple/Platinum Resistance Thermometer (Universal inputs) Sensor Platinum resistance Infrared temperature Thermocouple type thermometer sensor Sensor 10 to 60 to 115 to 140 to Pt100 JPt100 C/W PLII 70°C 120°C 165°C 260°C specification 2300 2300 1800 1800 1700 1700 1700 1600...

  • Page 8: Alarm Type

    E5GC Alarm Types Each alarm can be independently set to one of the following 17 alarm types. The default is 2: Upper limit. (See note.) Auxiliary outputs are allocated to alarms. ON delays and OFF delays (0 to 999 s) can also be specified. Note: In the default settings for models with HB or HS alarms, alarm 1 is set to a heater alarm (HA) and the Alarm Type 1 parameter is not displayed.
  • Page 9 E5GC *1. With set values 1, 4, and 5, the upper- and lower-limit values can *4. Set value: 5, Upper- and lower-limit with standby sequence be set independently for each alarm type, and are expressed as For Upper- and Lower-Limit Alarm Described Above at *2 “L”...
  • Page 10 *5. The unit is determined by the setting of the Integral/Derivative Time Unit parameter. *6. External serial communications (RS-485) and USB-Serial Conversion Cable communications can be used at the same time. *7. Refer to your OMRON website for the most recent information on applicable models. *8. Industrial electromagnetic environment (EN/IEC 61326-1 Table 2)

  • Page 11: Communications Specifications

    Programless Controllers: 32 max. (Up to 16 for the FX Series) communica- Applicable PLCs tions OMRON PLCs CS Series, CJ Series, CP Series, NJ Series, or NX1P Mitsubishi Electric PLCs MELSEC Q Series, L Series, FX3 Series, or iQ-R Series...

  • Page 12: External Connections

    E5GC External Connections E5GC Control Outputs E5GC-@ @ @ @ @ M - @ @ @ Relay output 250 VAC, 2 A (1) (2)(3)(4)(5) (resistive load) ↑ Terminal type Voltage output (for driving SSR) 12 VDC, 21 mA Auxiliary outputs 1, 2 Linear current output The E5GC is set for a K-type thermocouple (input type = 5) by 0 to 20 mA DC...
  • Page 13 E5GC Terminal Block Appearance E5GC-@C E5GC-@6 Controllers with Screwless Clamp Terminal Blocks Controllers with Screw Terminal Blocks (M3 Screws) Controllers with Screwless Clamp Terminals Blocks Controllers with Screw Terminal Blocks • Wire stripping length: 8 to 12 mm • Terminal type: Forked or round crimped terminals •...
  • Page 14 E5GC Dimensions (Unit: mm) Controllers E5GC-@6 Waterproof Packing (Accessory, Y92S-P12 (also available for ordering separately)) Controllers with Screw Mounting Adapter (Accessory, Y92F-53 (also available for ordering separately)) Terminal Blocks Terminal Cover (Accessory, E53-COV27 63.6 (also available for ordering separately)) 44.8 40.8 •...

  • Page 15: Current Transformers

    E5GC Accessories (Order Separately) USB-Serial Conversion Cable (2110) E58-CIFQ2 1510 LED (RD) USB connector (type A plug) Serial connector LED (PWR) LED (SD) Conversion Cable E58-CIFQ2-E Conversion Cable Connecting to the E58-CIFQ2 USB-Serial Conversion Cable (2110) (1510) 1510 E58-CIFQ2 (Order separately) Conversion Cable Note: Always use this product together with the E58-CIFQ2.

  • Page 16: Connection Example

    Filler 12 dia. (epoxy) E54-CT3 or E54-CT3L Case Maximum continuous heater current: 120 A (50/60 Hz) (PBT) (Maximum continuous heater current for an OMRON Digital Temperature Controller is 50 A.) 40 × 40 Number of windings: 400±2 Ω Winding resistance: 8±0.8...

  • Page 17: Mounting Adapter

    E5GC Mounting Adapter Y92F-53 (Two provided.) One pair is provided with the Temperature Controller. Order the Mounting Adapter 34.7 separately if it becomes lost or damaged. 11.8 9.4 Waterproof Packing Y92S-P12 The Waterproof Packing is provided with the Temperature Controller. Order the Waterproof Packing separately if it becomes lost or damaged.
  • Page 18 MEMO...

  • Page 19: Digital Temperature Controller

    Plug-in Models that can be removed from the terminal block. E5CC E5CC-B Refer to your OMRON website for the most recent information on • Short body with depth of only 60 mm. (Screw Terminal Blocks) applicable safety standards. • Easy connections to a PLC with programless communications.

  • Page 20: Model Number Legend

    *2. The control output cannot be used as a transfer output. *3. Option 004 can be selected only when "CX" is selected for the control outputs. Note: Draw-out-type models of the E5CC are available. Ask your OMRON representative for details. Heating and Cooling Control...
  • Page 21 E5CC/E5CC-B/E5CC-U Model Number Legend Models with Push-In Plus Terminal Blocks E5CC-@@ 2 @ B M -@@@ (Example: E5CC-RX2ABM-000) −− − − − − −−− B C D E No. of Power Model Meaning Control outputs Terminal Input auxiliary supply Options...

  • Page 22: List Of Models

    E5CC/E5CC-B/E5CC-U Model Number Legend Plug-in Models E5CC-@@ @ @ U M -000 (Example: E5CC-RW0AUM-000) B C D E Control No. of Power Model Meaning Terminal Input outputs auxiliary supply Options type type 1 and 2 outputs voltage E5CC 48 × 48 mm Control output 1 Control output 2 Relay output (SPDT)
  • Page 23 Model For the system requirements for the CX-Thermo, refer to Y92S-P8 information on the EST2-2C-MV4 on the OMRON website Note: The Waterproof Packing is provided only with E5CC/E5CC-B (www.ia.omron.com). Controllers. The E5CC-U cannot be waterproofed even if the Waterproof Packing is attached.
  • Page 24 E5CC/E5CC-B/E5CC-U Specifications Ratings A in model number: 100 to 240 VAC, 50/60 Hz Power supply voltage D in model number: 24 VAC, 50/60 Hz; 24 VDC Operating voltage range 85% to 110% of rated supply voltage Models with option selection of 000:5.2 VA max. at 100 to 240 VAC, and 3.1 VA max. at 24 VAC or Power consumption 1.6 W max.

  • Page 25: Input Ranges

    E5CC/E5CC-B/E5CC-U Input Ranges Thermocouple/Platinum Resistance Thermometer (Universal inputs) Sensor Platinum resistance Infrared temperature Thermocouple type thermometer sensor Sensor 10 to 60 to 115 to 140 to Pt100 JPt100 C/W PLII 70°C 120°C 165°C 260°C specification 2300 2300 1800 1800 1700 1700 1700 1600...

  • Page 26: Alarm Types

    E5CC/E5CC-B/E5CC-U Alarm Types Each alarm can be independently set to one of the following 19 alarm types. The default is 2: Upper limit. (see note.) Auxiliary outputs are allocated for alarms. ON delays and OFF delays (0 to 999 s) can also be specified. Note: In the default settings for models with HB or HS alarms, alarm 1 is set to a heater alarm (HA) and the Alarm Type 1 parameter is not displayed.
  • Page 27 E5CC/E5CC-B/E5CC-U *1. With set values 1, 4 and 5, the upper and lower limit values can *4. Set value: 5, Upper- and lower-limit with standby sequence be set independently for each alarm type, and are expressed as For Upper- and Lower-Limit Alarm Described Above *2 “L”...
  • Page 28 E5CC/E5CC-B/E5CC-U Characteristics E5CC/E5CC-B (±0.3% of indication value or ±1°C, whichever is greater) ±1 digit max. *1 Thermocouple: Platinum resistance thermometer: (±0.2% of indication value or ±0.8°C, whichever is greater) ±1 digit max. Analog input: ±0.2% FS ±1 digit max. Indication accuracy CT input: ±5% FS ±1 digit max.
  • Page 29 Voltage Dip/Interrupting Immunity: EN 61000-4-11 *8. The E5CC-U plug-in model is certified for UL listing only when used together with the OMRON P2CF-11 or P2CF-11-E Socket. The P3GA-11 is not certified for UL listing. *9. Access the following website for information on certified models. http://www.ia.omron.com/support/models/index.html *10.Refer to information on maritime standards in Shipping Standards on page 124 for compliance with Lloyd's Standards.

  • Page 30: Communications Specifications

    Number of connected Digital Temperature Controllers: 32 max. (Up to 16 for the FX Series) Applicable PLCs E5CC/E5CC-B Programless 250 VAC, 30 VDC OMRON PLCs communications *1 (resistive load) CS Series, CJ Series, CP Series, cosφ = 1 NJ Series, or NX1P...
  • Page 31 E5CC/E5CC-B/E5CC-U External Connections E5CC (Screw Terminal Blocks) Control output 1 E5CC-@@ 3 @ 5 M - @ @ @ Relay output 250 VAC, 3A (1) (2) (3) (4) (5) (resistive load) Voltage output ↑ (for driving SSR) Auxiliary outputs 1, 2, 3 Terminal type 12 VDC, 21 mA Relay outputs...
  • Page 32 E5CC/E5CC-B/E5CC-U E5CC-B (Push-In Plus Terminal Blocks) E5CC-@@ 2 @ B M - @ @ @ (1) (2) (3) (4) (5) Control output 1 ↑ Terminal type Relay output 250 VAC, 3A Auxiliary outputs 1, 2 The E5CC is set for a K-type thermocouple (resistive load) Voltage output (input type = 5) by default.
  • Page 33 E5CC/E5CC-B/E5CC-U E5CC-U (Plug-in Models) E5CC- UM-000 The E5CC-U is set for a K-type thermocouple (input type = 5) by default. An input error (s.err) will occur if the input Control output 1 type setting does not agree with the temperature sensor. Auxiliary outputs 1, 2 Check the input type.
  • Page 34 E5CC/E5CC-B/E5CC-U Nomenclature E5CC Front panel E5CC-B Temperature unit Top View of E5CC Top View of E5CC-B Top View of E5CC-U E5CC-U No. 1 display Operation indicators PV or specified parameter No. 2 display SP or specified parameter value Use the U D Keys to set the parameter.

  • Page 35: Terminal Covers

    E5CC/E5CC-B/E5CC-U E5CC-U 76.8 14.2 58.6 48 × 48 44.8 × 44.8 Mounting Adapter (Accessory, Y92F-49 (also available for ordering separately)) The Setup Tool port is on the top of the Temperature Controller. It is used to connect the Temperature Controller to the computer to use the Setup Tool. The E58-CIFQ2 USB-Serial Conversion Cable is required to make the connection.

  • Page 36: Current Transformers

    E5CC/E5CC-B/E5CC-U Waterproof Packing The Waterproof Packing is provided only with the E5CC/E5CC-B. Y92S-P8 (for DIN 48 × 48) It is not included with the E5CC-U. Order the Waterproof Packing separately if it becomes lost or damaged. The Waterproof Packing can be used to achieve an IP66 degree of protection. (Deterioration, shrinking, or hardening of the waterproof packing may occur depending on the operating environment.

  • Page 37: Connection Example

    Filler 12 dia. (epoxy) E54-CT3 or E54-CT3L Case Maximum continuous heater current: 120 A (50/60 Hz) (PBT) (Maximum continuous heater current for an OMRON Digital Temperature Controller is 50 A.) 40 × 40 Number of windings: 400±2 Ω Winding resistance: 8±0.8...
  • Page 38 E5CC/E5CC-B/E5CC-U Adapter Y92F-45 Note: 1. Use this Adapter when the Front Panel has already been prepared for the E5B@. 2. Only black is available. 3. You cannot use the E58-CIFQ2 USB-Serial Conversion Cable if you use the Y92F-45 Adapter. To use the USB-Serial Conversion Cable to make the settings, do so before you mount the Temperature Controller in the panel.

  • Page 39: Mounting Adapter

    E5CC/E5CC-B/E5CC-U Watertight Cover Mounting Adapter Y92A-48N Y92F-49 21.9 The Mounting Adapter is provided with the Temperature Controller. Order the Mounting Adapter separately if it becomes lost or damaged. 87.7 79.2 67.6 Protective Cover Protective Cover Y92A-48H Y92A-48D Note: This Protective Cover cannot be used if the Waterproof Packing is installed.
  • Page 40 MEMO...

  • Page 41: Digital Temperature Controller

    Blocks E5EC-B to each other. Refer to your OMRON website for the most recent • Tool ports are provided both on the top panel and the front panel. information on applicable safety standards. Set up the Controller without wiring the power supply by Refer to Safety Precautions on page 122.

  • Page 42: Model Number Legend

    *2. The control output cannot be used as a transfer output. *3. A model with four auxiliary outputs must be selected. Note: Draw-out-type models of the E5EC and E5AC are available. Ask your OMRON representative for details. Heating and Cooling Control...
  • Page 43 E5EC/E5EC-B/E5AC Model Number Legend Models with Push-In Plus Terminal Blocks E5EC-@@ @ @ B M -@@@ (Example: E5EC-RX4ABM-000) −− − − − − −−− B C D E Control No. of Power Model Meaning Terminal outputs auxiliary supply Input type Options type 1 and 2 outputs...

  • Page 44: Current Transformers (Cts)

    CX-Thermo version 4.67 or higher is required for the E5CC-B Temperature Controller. linear current output type. Waterproof Packing For the system requirements for the CX-Thermo, refer to information on the EST2-2C-MV4 on the OMRON website Applicable Controller Model (www.ia.omron.com). E5EC/E5EC-B...
  • Page 45 E5EC/E5EC-B/E5AC Specifications Ratings A in model number: 100 to 240 VAC, 50/60 Hz Power supply voltage D in model number: 24 VAC, 50/60 Hz; 24 VDC Operating voltage range 85 to 110% of rated supply voltage Models with option selection of 000: 6.6 VA max. at 100 to 240 VAC, and 4.1 VA max. at 24 VAC or E5EC/ 2.3 W max.

  • Page 46: Input Ranges

    E5EC/E5EC-B/E5AC Input Ranges Thermocouple/Platinum Resistance Thermometer (Universal inputs) Sensor Platinum resistance Infrared temperature Thermocouple type thermometer sensor Sensor 10 to 60 to 115 to 140 to Pt100 JPt100 C/W PLII 70°C 120°C 165°C 260°C specification 2300 2300 1800 1800 1700 1700 1700 1600...

  • Page 47: Alarm Types

    E5EC/E5EC-B/E5AC Alarm Types Each alarm can be independently set to one of the following 19 alarm types. The default is 2: Upper limit. (see note.) Auxiliary outputs are allocated for alarms. ON delays and OFF delays (0 to 999 s) can also be specified. Note: In the default settings for models with HB or HS alarms, alarm 1 is set to a heater alarm (HA) and the Alarm Type 1 parameter is not displayed.
  • Page 48 E5EC/E5EC-B/E5AC *1. With set values 1, 4 and 5, the upper and lower limit values can *4. Set value: 5, Upper- and lower-limit with standby sequence be set independently for each alarm type, and are expressed as For Upper- and Lower-Limit Alarm Described Above *2 “L”...
  • Page 49 *5. External communications (RS-485) and USB-serial conversion cable communications can be used at the same time. *6. Refer to your OMRON website for the most recent information on applicable models. *7. Refer to information on maritime standards in Shipping Standards on page 124 for compliance with Lloyd's Standards.

  • Page 50: Communications Specifications

    PLCs. No communications programming is required. Number of connected Digital Temperature Controllers: 32 max. (Up to 16 for the FX Series) Applicable PLCs Programless OMRON PLCs communications *1 CS Series, CJ Series, CP Series, NJ Series, or NX1P Mitsubishi Electric PLCs...
  • Page 51 E5EC/E5EC-B/E5AC External Connections E5EC/E5AC (Screw Terminal Blocks) E5EC-@@ 4 @ 5 M - @ @ @ E5AC-@@ 4 @ 5 M - @ @ @ (1) (2) (3) (4) (5) (1) (2) (3) (4) (5) The E5EC is set for a K-type thermocouple (input type = 5) by default.
  • Page 52 E5EC/E5EC-B/E5AC E5EC-B (Push-In Plus Terminal Blocks) E5EC-@@ @ @ B M - @ @ @ (6) Options (2) (3) (4) (5) Communications, 2 event inputs Communications, 2 event inputs, and 1 CT input ↑ B(+) B(+) Terminal type RS-485 RS-485 Control output 1 Auxiliary outputs 1, 2, 3, 4 The E5EC is set for a K-type...
  • Page 53 E5EC/E5EC-B/E5AC Isolation/Insulation Block Diagrams Models with 2 Auxiliary Outputs Models with 4 Auxiliary Outputs Sensor input, CT inputs, potentiometer input, and remote SP input Sensor input, CT inputs, and remote SP input Communications and event inputs Communications and event inputs Voltage output (for driving SSR), Voltage output (for driving SSR) and transfer output Power...
  • Page 54 E5EC/E5EC-B/E5AC Dimensions (Unit: mm) Controllers E5EC (64) Waterproof Packing (Accessory, Y92S-P9 Mounting Adapter (also available for (Accessory, Y92F-51 ordering separately)) (also available for E5EC-B ordering separately)) (71.4) 67.4 Mounting Adapter Waterproof Packing (Accessory, Y92S-P9 (Accessory, Y92F-51 (also available for (also available for ordering separately)) ordering separately)) •...
  • Page 55 E5EC/E5EC-B/E5AC E5AC (64) 96 x 96 91 x 91 Waterproof Packing Mounting Adapter (Accessory, Y92S-P10 (Accessory, Y92F-51 (also available for (also available for ordering separately)) ordering separately)) • Setup Tool ports are provided as standard feature. Use these ports to connect a computer to the Digital Temperature Controller.
  • Page 56 E5EC/E5EC-B/E5AC Accessories (Order Separately) USB-Serial Conversion Cable E58-CIFQ2 (2110) 1510 LED (RD) USB connector (type A plug) Serial connector LED (PWR) LED (SD) Conversion Cable E58-CIFQ2-E Conversion Cable Connecting to the E58-CIFQ2 USB-Serial Conversion Cable (2110) (1510) 1510 E58-CIFQ2 (Order Separately) Conversion Cable Note: Always use this product together with the E58-CIFQ2.

  • Page 57: Current Transformers

    E5EC/E5EC-B/E5AC Watertight Cover Watertight Cover Y92A-96N (96 × 96) Y92A-49N (48 × 96) 21.9 21.9 131.7 131.7 115.6 28.9 67.6 28.9 Current Transformers E54-CT1 Thru-current (Io) vs. Output Voltage (Eo) (Reference Values) Filler E54-CT1 or E54-CT1L 5.8 dia. (epoxy) Maximum continuous heater current: 50 A (50/60 Hz) Case ±...

  • Page 58: Connection Example

    Filler 12 dia. (epoxy) E54-CT3 or E54-CT3L Case Maximum continuous heater current: 120 A (50/60 Hz) (PBT) (Maximum continuous heater current for an OMRON Digital Temperature Controller is 50 A.) 40 × 40 Number of windings: 400±2 Ω Winding resistance: 8±0.8...
  • Page 59 E5DC-B (Maximum connectable units: 16) • High-speed sampling at 50 ms for applications with high-speed Refer to your OMRON website for the most recent temperature increases. information on applicable safety standards. • Easy connections to a PLC with programless communications.

  • Page 60: Model Number Legend

    E5DC/E5DC-B Model Number Legend and Standard Models Model Number Legend Models with Screw Terminal Blocks E5DC-@@ @ @ @ M -@@@ (Example: E5DC-RX0ASM-015) −− − − − − −−− B C D E Control No. of Power Model Meaning Terminal Input outputs 1 auxiliary...
  • Page 61 E5DC/E5DC-B Model Number Legend Models with Push-In Plus Terminal Blocks E5DC-@@ @ @ B M-@@@ (Example: E5DC-QX2ABM-002) −− − − − − −−− B C D E Control No. of Power Model Meaning Terminal Input outputs 1 auxiliary supply Options type type and 2...
  • Page 62 EST2-2C-MV4 Note: CX-Thermo version 4.6 or higher is required for the E5DC. CX-Thermo version 4.69 or higher is required for the E5DC-B. For the system requirements for the CX-Thermo, refer to information on the EST2-2C-MV4 on the OMRON website (www.ia.omron.com).
  • Page 63 E5DC/E5DC-B Specifications Ratings A in model number: 100 to 240 VAC, 50/60 Hz Power supply voltage D in model number: 24 VAC, 50/60 Hz; 24 VDC Operating voltage range 85 to 110% of rated supply voltage Power consumption 4.9 VA max. at 100 to 240 VAC, and 2.8 VA max. at 24 VDC or 1.5 W max. at 24 VDC Temperature input Thermocouple: K, J, T, E, L, U, N, R, S, B, C/W, or PL II Platinum resistance thermometer: Pt100 or JPt100...

  • Page 64: Input Ranges

    E5DC/E5DC-B Input Ranges Thermocouple/Platinum Resistance Thermometer (Universal inputs) Sensor Platinum resistance Infrared temperature Thermocouple type thermometer sensor Sensor 10 to 60 to 115 to 140 to Pt100 JPt100 C/W PLII 70°C 120°C 165°C 260°C specification 2300 2300 1800 1800 1700 1700 1700 1600...

  • Page 65: Alarm Types

    E5DC/E5DC-B Alarm Types Each alarm can be independently set to one of the following 17 alarm types. The default is 2: Upper limit. (See note.) Auxiliary outputs are allocated to alarms. ON delays and OFF delays (0 to 999 s) can also be specified. Note: In the default settings for models with HB or HS alarms, alarm 1 is set to a heater alarm (HA) and the Alarm Type 1 parameter is not displayed.
  • Page 66 E5DC/E5DC-B *1. With set values 1, 4, and 5, the upper- and lower-limit values can *4. Set value: 5, Upper- and lower-limit with standby sequence be set independently for each alarm type, and are expressed as For Upper- and Lower-Limit Alarm Described Above at *2 “L”...
  • Page 67 *6. External serial communications (RS-485) and USB-Serial Conversion Cable communications can be used at the same time. *7. Refer to your OMRON website for the most recent information on applicable models. *8. Refer to information on maritime standards in Shipping Standards on page 124 for compliance with Lloyd's Standards.

  • Page 68: Communications Specifications

    Programless Controllers: 32 max. (Up to 16 for the FX Series) communica- Applicable PLCs tions *1 OMRON PLCs CS Series, CJ Series, CP E5DC/E5DC-B Series, NJ Series, or NX1P 250 VAC, 30 VDC Mitsubishi Electric PLCs MELSEC Q Series, L Series,...

  • Page 69: External Connections

    E5DC/E5DC-B External Connections E5DC (Models with Screw Terminal Blocks) Control output Auxiliary outputs 1, 2 The E5DC is set for a K-type thermocouple (input type = 5) by default. Relay outputs Relay output An input error (s.err) will occur if the input type setting does not agree 250 VAC: 2 A (resistive load) 250 VAC, 3 A (resistive load) with the temperature sensor.
  • Page 70 E5DC/E5DC-B E5DC-B (Models with Push-In Plus Terminal Blocks) Control output Auxiliary outputs 1, 2 The E5DC-B is set for a K-type thermocouple (input type = 5) by default. Relay outputs An input error (s.err) will occur if the input type setting does not agree Relay output 250 VAC: 2 A (resistive load) with the temperature sensor.
  • Page 71 E5DC/E5DC-B Nomenclature E5DC Front panel E5DC-B Bottom View of E5DC/E5DC-B No. 1 display PV or specified parameter Operation indicators No.2 display SP or specified parameter value Press O Key once to go to Use the M Key to change to another Adjustment Level.
  • Page 72 E5DC/E5DC-B Dimensions (Unit: mm) Controllers E5DC (85) 22.5 22.5 +1.15 -0.2 +1.15 -0.2 The above figure shows the Mounting Adapter Terminal Unit (E5DC-SCT1S) Terminal Unit attached to (Y92F-53)(Order separately) the Main Unit. E5DC-B (90) (6.5) 22.5 (6.5) 22.5 +1.15 -0.2 +1.15 -0.2 The above figure shows the...

  • Page 73: Terminal Unit

    E5DC/E5DC-B Accessories (Order Separately) Terminal Unit Push-In Plus Terminal Unit E5DC-SCT1S E5DC-SCT1B (6.5) 22.5 30.7 22.5 36.2 +1.15 +1.15 -0.2 -0.2 USB-Serial Conversion Cable E58-CIFQ2 (2110) 1510 LED (RD) USB connector (type A plug) Serial connector LED (PWR) LED (SD) Conversion Cable E58-CIFQ2-E Conversion Cable...

  • Page 74: Current Transformers

    E5DC/E5DC-B Current Transformers E54-CT1 Thru-current (Io) vs. Output Voltage (Eo) (Reference Values) Filler E54-CT1 or E54-CT1L 5.8 dia. (epoxy) Maximum continuous heater current: 50 A (50/60 Hz) Case ± Number of windings: ± Ω Winding resistance: 10.5 100V Frequency: 50 Hz ∞...

  • Page 75: Connection Example

    Filler 12 dia. (epoxy) E54-CT3 or E54-CT3L Case Maximum continuous heater current: 120 A (50/60 Hz) (PBT) (Maximum continuous heater current for an OMRON Digital Temperature Controller is 50 A.) 40 × 40 Number of windings: 400±2 Ω Winding resistance: 8±0.8...

  • Page 76: Mounting Adapters

    E5DC/E5DC-B Short Bars Mounting Adapters Y92S-P11 (Four included.) Y92F-53 (Two included.) Use this product to connect between terminals (for power supplies, This accessory is not included with the communications, etc.) when you use multiple E5DC Controllers. product. Order it separately to mount the product to a panel.

  • Page 77: Connector Cover

    E5DC/E5DC-B Connector Cover E53-COV26 Male connector cover Female connector cover E5DC-B Push-In Plus Terminal Units are mounted with both a male and female connector cover (E53-COV26). Order the connector cover separately if it becomes lost or damaged.
  • Page 78 MEMO...
  • Page 79 Communications Conversion Cable (sold E5CC-T separately). Setup is easy with the CX-Thermo (sold separately). Refer to your OMRON website for the most recent information on applicable safety standards. • Easy connections to a PLC with programless communications. Use component communications to link Temperature Controllers to each Refer to Safety Precautions on page 122.

  • Page 80: Model Number Legend

    E5CC-T Model Number Legend and Standard Models Model Number Legend Models with Screw Terminal Blocks E5CC-T @@3 @5 M -@@@ (Example: E5CC-TRX3A5M-000) −−−−−− −−− A BC D E No. of Power Model Meaning Control outputs Terminal Input auxiliary supply Options 1 and 2 type type...
  • Page 81 Note: CX-Thermo version 4.61 or higher is required for the E5CC-T. Temperature Controller. The E53-COV10 cannot be used. For the system requirements for the CX-Thermo, refer to Refer to page 89 for the mounted dimensions. information on the EST2-2C-MV4 on the OMRON website (www.ia.omron.com). Waterproof Packing Model...
  • Page 82 E5CC-T Specifications Ratings A in model number: 100 to 240 VAC, 50/60 Hz Power supply voltage D in model number: 24 VAC, 50/60 Hz; 24 VDC Operating voltage range 85 to 110% of rated supply voltage Power consumption 7.5 VA max. at 100 to 240 VAC, and 4.1 VA max. at 24 VAC or 2.3 W max. at 24 VDC Temperature input Thermocouple: K, J, T, E, L, U, N, R, S, B, C/W, or PL II Platinum resistance thermometer: Pt100 or JPt100...

  • Page 83: Input Ranges

    E5CC-T Input Ranges Thermocouple/Platinum Resistance Thermometer (Universal inputs) Sensor Platinum resistance Infrared temperature Thermocouple type thermometer sensor Sensor 10 to 60 to 115 to 140 to Pt100 JPt100 C/W PLII 70°C 120°C 165°C 260°C specification 2300 2300 1800 1800 1700 1700 1700 1600...
  • Page 84 E5CC-T Alarm Types Each alarm can be independently set to one of the following 17 alarm types. The default is 2: Upper limit. (see note.) Auxiliary outputs are allocated for alarms. ON delays and OFF delays (0 to 999 s) can also be specified. Note: In the default settings for models with HB or HS alarms, alarm 1 is set to a heater alarm (HA) and the Alarm Type 1 parameter is not displayed.
  • Page 85 E5CC-T *1. With set values 1, 4 and 5, the upper and lower limit values can *4. Set value: 5, Upper- and lower-limit with standby sequence be set independently for each alarm type, and are expressed as For Upper- and Lower-Limit Alarm Described Above *2 “L”...
  • Page 86 *4. The unit is determined by the setting of the Integral/Derivative Time Unit parameter. *5. External communications (RS-485) and USB-serial conversion cable communications can be used at the same time. *6. Refer to your OMRON website for the most recent information on applicable models. *7. Industrial electromagnetic environment (EN/IEC 61326-1 Table 2)

  • Page 87: Program Control

    E5CC-T Program Control Number of programs (patterns) Number of segments (steps) Time setting (Segment set with set point and time.) Segment setting method Slope setting (Segment set with segment type, set point, slope, and time.) 0 h 0 min to 99 h 59 min Segment times 0 min 0 s to 99 min 59 s Alarm setting...

  • Page 88: Communications Specifications

    Programless Number of connected Digital Temperature communica- Controllers: 32 max. tions * Applicable PLCs OMRON PLCs CS Series, CJ Series, CP E5CC-T Series, NJ Series, or NX1P 250 VAC, 30 VDC Mitsubishi Electric PLCs MELSEC Q Series, L Series, (resistive load) or iQ-R Series cosφ...

  • Page 89: External Connections

    E5CC-T External Connections E5CC-T Control output 1 Relay output E5CC 250 VAC, 3 A (2) (3) (4) (5) (resistive load) Voltage output Terminal type (for driving SSR) Auxiliary outputs 12 VDC, 21 mA The E5CC-T is set for a K-type thermocouple (input Control output 2 Linear current output Relay output...
  • Page 90 E5CC-T Nomenclature E5CC-T Front panel Temperature unit Operation indicators No. 1 display PV or specified monitor/setting parameter Top View of E5CC-T No. 2 display Press O Key once to go to SP or specified monitor/parameter value Program Setting Level. Top-panel Setup Tool port Press O Key for at least 3 seconds to go to Initial Setting Use the...
  • Page 91 E5CC-T Accessories (Order Separately) USB-Serial Conversion Cable E58-CIFQ2 (2110) 1510 LED (RD) USB connector (type A plug) Serial connector LED (PWR) LED (SD) Terminal Covers E53-COV17 E53-COV23 (Three Covers provided.) 48.8 Terminal Cover (E53-COV23) 44.8 Waterproof Packing Y92S-P8 (for DIN 48 × 48) The Waterproof Packing is provided with the Temperature Controller.

  • Page 92: Current Transformers

    E5CC-T Current Transformers E54-CT1 Thru-current (Io) vs. Output Voltage (Eo) (Reference Values) Filler E54-CT1 or E54-CT1L 5.8 dia. (epoxy) Maximum continuous heater current: 50 A (50/60 Hz) Case ± Number of windings: ± Ω Winding resistance: 10.5 100V Frequency: 50 Hz ∞...

  • Page 93: Connection Example

    Filler 12 dia. (epoxy) E54-CT3 or E54-CT3L Case Maximum continuous heater current: 120 A (50/60 Hz) (PBT) (Maximum continuous heater current for an OMRON Digital Temperature Controller is 50 A.) 40 × 40 Number of windings: 400±2 Ω Winding resistance: 8±0.8...
  • Page 94 E5CC-T Adapter Y92F-45 Note: 1. Use this Adapter when the Front Panel has already been prepared for the E5B@. 2. Only black is available. 3. You cannot use the E58-CIFQ2 USB-Serial Conversion Cable if you use the Y92F-45 Adapter. To use the USB-Serial Conversion Cable to make the settings, do so before you mount the Temperature Controller in the panel.
  • Page 95 E5CC-T Watertight Cover Mounting Adapter Y92A-48N Y92F-49 21.9 The Mounting Adapter is provided with the Temperature Controller. Order the Mounting Adapter separately if it becomes lost or damaged. 87.7 79.2 67.6 28.9 Protective Cover Protective Cover Y92A-48H Y92A-48D Note: This Protective Cover cannot be used if the Waterproof Packing is installed.
  • Page 96 MEMO...
  • Page 97 E5EC-T E5AC-T inputs, and a transfer output to cover a wide range of applications. Refer to your OMRON website for the most recent • Short body with depth of only 60 mm. information on applicable safety standards. • Easy connections to a PLC with programless communications. Use component communications to link Temperature Controllers to each Refer to Safety Precautions on page 122.
  • Page 98 E5EC-T/E5AC-T Model Number Legend and Standard Models Model Number Legend Models with Screw Terminal Blocks E5EC-T@@ 4 @ 5 M -@@@ (Example: E5EC-TRX4A5M-000) −−− − − − −−− A B C D E E5AC-T@@ 4 @ 5 M -@@@ (Example: E5AC-TRX4A5M-000) −−−−...
  • Page 99 Note: CX-Thermo version 4.61 or higher is required for the E5EC-T/ E53-COV24 (3pcs) E5AC-T. For the system requirements for the CX-Thermo, refer to Note: The Terminal Covers E53-COV24 are provided with the Digital information on the EST2-2C-MV4 on the OMRON website Temperature Controller. (www.ia.omron.com). Waterproof Packing Applicable Controller...
  • Page 100 E5EC-T/E5AC-T Specifications Ratings A in model number: 100 to 240 VAC, 50/60 Hz Power supply voltage D in model number: 24 VAC, 50/60 Hz; 24 VDC Operating voltage range 85 to 110% of rated supply voltage E5EC-T 8.7 VA max. at 100 to 240 VAC, and 5.5 VA max. at 24 VAC or 3.2 W max. at 24 VDC Power consumption E5AC-T 9.0 VA max.
  • Page 101 E5EC-T/E5AC-T Input Ranges Thermocouple/Platinum Resistance Thermometer (Universal inputs) Sensor Platinum resistance Infrared temperature Thermocouple type thermometer sensor Sensor 10 to 60 to 115 to 140 to Pt100 JPt100 C/W PLII 70°C 120°C 165°C 260°C specification 2300 2300 1800 1800 1700 1700 1700 1600...
  • Page 102 E5EC-T/E5AC-T Alarm Types Each alarm can be independently set to one of the following 17 alarm types. The default is 2: Upper limit. (see note.) Auxiliary outputs are allocated for alarms. ON delays and OFF delays (0 to 999 s) can also be specified. Note: In the default settings for models with HB or HS alarms, alarm 1 is set to a heater alarm (HA) and the Alarm Type 1 parameter is not displayed.
  • Page 103 E5EC-T/E5AC-T *1. With set values 1, 4 and 5, the upper and lower limit values can *4. Set value: 5, Upper- and lower-limit with standby sequence be set independently for each alarm type, and are expressed as For Upper- and Lower-Limit Alarm Described Above *2 “L”...
  • Page 104 *4. The unit is determined by the setting of the Integral/Derivative Time Unit parameter. *5. External communications (RS-485) and USB-serial conversion cable communications can be used at the same time. *6. Refer to your OMRON website for the most recent information on applicable models. *7. Industrial electromagnetic environment (EN/IEC 61326-1 Table 2)
  • Page 105 E5EC-T/E5AC-T Program Control Number of programs (patterns) Number of segments (steps) Time setting (Segment set with set point and time.) Segment setting method Slope setting (Segment set with segment type, set point, slope, and time.) 0 h 0 min to 99 h 59 min Segment times 0 min 0 s to 99 min 59 s Alarm setting...
  • Page 106 Programless Number of connected Digital Temperature Controllers: communica- 32 max. tions * Applicable PLCs OMRON PLCs CS Series, CJ Series, CP Series, NJ Series, or NX1P Mitsubishi Electric PLCs MELSEC Q Series, L Series, or iQ-R Series Switching current (A)
  • Page 107 E5EC-T/E5AC-T External Connections E5EC-T/E5AC-T E5EC E5AC (2) (3) (4) (5) (2) (3) (4) (5) Terminal type Terminal type Control output 1 Control output 2 Auxiliary outputs Relay output Relay output Relay output Models with 4 auxiliary 250 VAC, 5 A 250 VAC, 5A (resistive load) Use no-voltage inputs for the event inputs.
  • Page 108 E5EC-T/E5AC-T Nomenclature E5EC-T Front panel Top View of E5EC-T No. 1 display Temperature unit PV or specified monitor/parameter Operation indicators No. 2 display Top-panel SP or specified monitor/parameter value Setup Tool port No. 3 display Use S Key to change the Program No., segment No., digit (default setting).
  • Page 109 E5EC-T/E5AC-T Dimensions (Unit: mm) Controllers E5EC-T • Setup Tool ports are provided as (64) standard feature. Use these ports to connect a computer to the Digital Temperature Controller. The E58- CIFQ2 USB-Serial Conversion Cable is required to connect to the port on the top panel.
  • Page 110 E5EC-T/E5AC-T E5AC-T (64) 96 x 96 91 x 91 Waterproof Packing Mounting Adapter (Accessory, Y92S-P10 (Accessory, Y92F-51 (also available for (also available for ordering separately)) ordering separately)) • Setup Tool ports are provided as standard feature. Use these ports to connect a computer to the Digital Temperature Controller.
  • Page 111 E5EC-T/E5AC-T Accessories (Order Separately) USB-Serial Conversion Cable E58-CIFQ2 (2110) 1510 LED (RD) USB connector (type A plug) Serial connector LED (PWR) LED (SD) Conversion Cable E58-CIFQ2-E Conversion Cable Connecting to the E58-CIFQ2 USB-Serial Conversion Cable (2110) (1510) 1510 E58-CIFQ2 (Order Separately) Conversion Cable Note: Always use this product together with the E58-CIFQ2.
  • Page 112 E5EC-T/E5AC-T Watertight Cover Watertight Cover Y92A-96N (96 × 96) Y92A-49N (48 × 96) 21.9 21.9 131.7 131.7 115.6 28.9 67.6 28.9 Current Transformers E54-CT1 Thru-current (Io) vs. Output Voltage (Eo) (Reference Values) Filler E54-CT1 or E54-CT1L 5.8 dia. (epoxy) Maximum continuous heater current: 50 A (50/60 Hz) Case ±...
  • Page 113 Filler 12 dia. (epoxy) E54-CT3 or E54-CT3L Case Maximum continuous heater current: 120 A (50/60 Hz) (PBT) (Maximum continuous heater current for an OMRON Digital Temperature Controller is 50 A.) 40 × 40 Number of windings: 400±2 Ω Winding resistance: 8±0.8...
  • Page 114 MEMO...

  • Page 115: Operation

    E5@C/E5@C-T Operation Setting Levels Diagram E5C This diagram shows all of the setting levels. To move to the advanced function setting level and calibration level, you must enter passwords. Some parameters are not displayed depending on the protect level setting and the conditions of use. Control stops when you move from the operation level to the initial setting level.
  • Page 116 E5@C/E5@C-T E5C-T This diagram shows all of the setting levels. To move to the advanced function setting level and calibration level, you must enter passwords. Some parameters are not displayed depending on the protect level setting and the conditions of use. Press O and M Keys Protect Level for at least 1 s.
  • Page 117 E5@C/E5@C-T Operation Parameters E5@C The following pages describe the parameters set in each level. Pressing the M (Mode) Key at the last parameter in each level returns to the top parameter in that level. Some parameters may not be displayed depending on the model and other settings. Press the S Key*2 Power ON Starting in Manual Mode.

  • Page 118: Monitor/Setting Item Level

    E5@C/E5@C-T Monitor/Setting Item Level Monitor/Setting Monitor/Setting Monitor/Setting Monitor/Setting Monitor/Setting Item Display 4 Item Display 1 Item Display 3 Item Display 5 Item Display 2 Note: The monitor/setting items to be displayed is set in the Monitor/Setting Item 1 to 5 parameters (advanced function setting level). Press the O Key for at least 1 s.
  • Page 119 E5@C/E5@C-T E5@C-T Some parameters may not be displayed depending on the model and other settings. Starting in manual mode Monitor/Setting Item Level PF Monitor/ Power ON PF Monitor/Setting Manual Control Level Setting Item Item display 2 to 5 display 1 * The monitor/setting items to display are set in the Monitor/Setting Item 1 to 5 parameters PV/Manual MV (Advanced Function Setting Level).
  • Page 120 E5@C/E5@C-T Press O Key Protect Level for at least 1 s. Press O + M Key for at least 3 s. Operation/Adjustment oapt pfpt PF Key Protect pmov Protect Move to Protect Level Initial Setting/ Parameter Mask Enable icpt pmsk Press O + M Key for at least 3 s.
  • Page 121 E5@C/E5@C-T Advanced Function Setting Level Direct Setting of Position init mant pmvd Manual Output Method Proportional MV Parameter Initialization hold PV Rate of Change mani pvrp pend Manual MV Initial Value Program End ON Time Calculation Period Heating/Cooling Tuning hctm Standby Time Unit Method ompw...
  • Page 122 E5@C/E5@C-T Error Displays (Troubleshooting) When an error occurs, the No. 1 display or No. 2 display shows the error code. Take necessary measure according to the error code, referring the following table. Display Name Meaning Action Operation The input value exceeded the control Check the wiring for input to be sure After the error occurs and it is range.*...

  • Page 123: Safety Precautions

    E5@C/E5@C-T Safety Precautions Be sure to read the precautions for all E5@C/E5@C-T models in the website at: http://www.ia.omron.com/. Warning Indications Minor electric shock or fire may occasionally occur. Indicates a potentially hazardous Do not use any cables that are damaged.
  • Page 124 E5@C/E5@C-T Precautions for Safe Use Be sure to observe the following precautions to prevent malfunction 6. Do not wire the terminals that are not used. 7. Use a commercial power supply for the power supply voltage input or adverse affects on the performance or functionality of the product. to a Digital Temperature Controller with AC input specifications.

  • Page 125: Shipping Standards

    E5@C/E5@C-T 23.Do not disconnect the Communications Conversion Cable or the Shipping Standards USB-Serial Conversion Cable while communications are in progress. Damage or malfunction may occur. The E5CC, E5CC-B, E5CC-U, E5EC, E5EC-B, E5AC, and E5DC 24.Do not touch the external power supply terminals or other metal comply with Lloyd's standards.

  • Page 126: Measurement Accuracy

    E5@C/E5@C-T Measurement Accuracy 5. Wiring When linking the units together, connect the power cable only to 1. When extending or connecting the thermocouple lead wire, be sure to the unit at the left end of the linkage block. Incorrect wiring can be use compensating wires that match the thermocouple types.
  • Page 127 E5@C/E5@C-T E5CC/E5CC-B/E5CC-U/E5CC-T E5DC/E5DC-B • E5CC/E5CC-T Adapter Panel There are two models of Terminal Covers that you can use with the E5CC/E5CC-T. Terminal Cover Terminal Cover (E53-COV17) (E53-COV23) (Sold separately) Adapter Terminal Unit Main Unit Water Proof Packing Panel • E5CC-U 1.

  • Page 128: Removing The Main Unit

    E5@C/E5@C-T Removing the Main Unit Removing the Main Unit Press in the two hooks on the Main Unit and remove the Main Unit from the Terminal Unit. (2) Pull out the Main Unit. (1) Push in the hooks. End Plate Installation Make sure to attach PFP-M End Plates to the ends of the Units.
  • Page 129 E5@C/E5@C-T Removing from the DIN Track 5. Insert the main unit into the mounting hole in the panel, and then mount the terminal unit. 1. Remove the Main Unit from the Terminal Unit. 2. Remove the Terminal Units. 6. Push the adapter from the terminal unit side until it comes into contact with the panel to temporarily secure the unit, and then tighten the two fastening screws on the adapter.
  • Page 130 E5@C/E5@C-T Attaching the Connector Cover 2. Remove the Main Unit from the Terminal Unit. E5DC-B For male connector covers 1. Press on the connector cover until it clicks into place. There is no vertical direction for male connector covers. For female connector covers 3.

  • Page 131: Mounting The Terminal Cover

    E5@C/E5@C-T Mounting the Terminal Cover Attaching the End Cover E5CC/E5CC-T E5DC/E5DC-B Slightly bend the E53-COV23 Terminal Cover to attach it to the 1. Install the E5DC/E5DC-B in a panel. terminal block as shown in the following diagram. The Terminal Cover cannot be attached in the opposite direction.

  • Page 132: Precautions When Wiring

    E5@C/E5@C-T Removing the Digital Temperature Controller from the case Removing the draw-out jig when only one hook is caught E5GC in the draw-out jig insertion hole You can use the Y92F-55 Draw-out Jig to remove the interior body of 1. Pull the Draw-out Jig slowly in the direction shown in the figure. (This step is the same even if the other hook is caught.) the Digital Temperature Controller from the case to perform 2.

  • Page 133: Checking Connections

    E5@C/E5@C-T Crimp Terminal E5GC (Controllers with Screwless Clamp For the E5CC/E5EC/E5AC/E5DC/E5GC (Controllers with Screw Terminal Blocks) Terminal Blocks) or E5@C-T, use the following types of crimp 1. Connection Method for Screwless Clamp Terminals terminals for M3 screws. The same method is used to connect stranded wires, solid wires, and ferrules.
  • Page 134 E5@C/E5@C-T 3. Recommended Wire Size and Ferrules E5@C-B (Controllers with Push-In Plus Terminal Wire Size Blocks) Use the wire sizes and stripping lengths given in the following table. 1. Connecting Wires to the Push-In Plus Terminal Block Part Names of the Terminal Block Wire Size Stripping length AWG24 to AWG18...

  • Page 135: Removing Wires From The Push-In Plus Terminal Block

    ∗ Side view of the product SDIS 0.4✕2.5✕75 Weidmuller 10 to 15° 9900 (-2.5✕75) Vessel * OMRON's exclusive purchase model XW4Z-00B is available to 30° order as SZF 0-0,4 x 2,5 (manufactured by Phoenix Contact). Flat-blade screwdriver ∗ Side view of the product 3.

  • Page 136: Scope Of Guarantee

    Unit, the positive and negative thermocouple input terminals of the Unit are short-circuited, and the ambient temperature is stable. Should the Unit malfunction during the guarantee period, OMRON shall repair the Unit or replace any parts of the Unit at the expense of OMRON.
  • Page 137 MEMO...

  • Page 138: Terms And Conditions Agreement

    Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements.
  • Page 139 The Netherlands Hoffman Estates, IL 60169 U.S.A. Tel: (31)2356-81-300/Fax: (31)2356-81-388 Tel: (1) 847-843-7900/Fax: (1) 847-843-7787 © OMRON Corporation 2011-2019 All Rights Reserved. OMRON (CHINA) CO., LTD. OMRON ASIA PACIFIC PTE. LTD. In the interest of product improvement, Room 2211, Bank of China Tower, No.

This manual is also suitable for:

E5 c-t seriesE5 c seriesE5ccE5cc-bE5cc-uE5ec ... Show all