Advertisement
6 Programless Communications
6-4-5
Checking Operation
The SP and RUN/STOP status of the E5@D Controllers will be changed to check operation. Make sure
that this will not create any problems in the controlled system.
Checking E5CD Monitor Values
(1) The PLC operating mode must be changed to PROGRAM mode to enable changing
values in PLC memory.
Perform step 1 in Communications Settings for the Serial Communications Option Board in
6-4-3 PLC Setup to move to PROGRAM mode.
(2) Double-click Memory. The PLC Memory Window will be displayed.
(3) We will monitor memory in the PLC Memory Window.
Double-click D to select the DM Area in the left pane and then select Online
from the menu bar. The Monitor Memory Areas Dialog Box will be displayed. Click the
Monitor Button.
6 - 28
E5@D Digital Temperature Controllers Communications Manual (H225)
−
Monitor
Advertisement
