Advertisement
Communications Settings in the Serial Communications Unit (SCU)
(1) The PLC operating mode must be changed to PROGRAM mode to enable changing
the SCU communications settings.
Select PLC
will be displayed. Click the Yes Button.
(2) Double-click IO Table and Unit Setup. The IO Table Window will be displayed.
(3) Double-click CJ1W-SCU21-V1. The CJ1W-SCU21-V1 Setting Window will be
displayed.
E5@D Digital Temperature Controllers Communications Manual (H225)
−
−
Program from the menu bar. A confirmation dialog box
Operating Mode
6 Programless Communications
6
6 - 35
Advertisement
