Advertisement
Click the Yes Button to restart the Unit. Select All ports and then click the OK Button.
A dialog box will be displayed when the Unit has been restarted. Click the OK Button. This
completes the PLC setup procedure. You will use the CX-Programmer to check operation,
so leave it online.
6-5-4
E5@D Controller Setup
Set up programless communications. Perform the procedure that is given in 6-4-4 E5
Setup.
6-5-5
Checking Operation
Perform the procedure that is given in 6-4-5 Checking Operation.
E5@D Digital Temperature Controllers Communications Manual (H225)
6 Programless Communications
@
D Controller
6
6 - 37
Advertisement
