Omron E5 D Series Communications Manual page 172

6 Programless Communications
With the default settings, the following parameters are set for the download areas.
No.0 No.1
D15 D45
D16 D46
D17 D47
D18 D48
D19 D49
D20 D50
D21 D51
D22 D52
D23 D53
D24 D54
D25 D55
D26 D56
D27 D57
D28 D58
D29 D59
(2) We will initialize the download areas with the set values from the E5CD Controllers.
The download areas have not been initialized, so we will initialize them with the set values
from the E5CD Controllers.
Double-click D15 (Request Flag) on the Device Memory Dialog Box. The following dialog
box is displayed. Enter 2 (Initialize Download Areas), click the Set Button, and then click
the Close Button.
(3) We will confirm that the download areas have been initialized.
When initialization is completed, D0 (Response Flag) will change to 1 (Normal End) and
D15 (Request Flag) will automatically change to 1 (Enable Writing). Check the download
area to see if it has been initialized to the values given in the above table.
Confirm this for the No. 1 and No. 2 Controllers as well.
6 - 64
No.2 Parameter
D75 Request Flag (fixed)
D76 Operation Command Code (fixed)
D77 Set Point
D78 Proportional Band
D79 Integral Time
D80 Derivative Time
D81 Alarm Value 1
D82 Alarm Value Upper Limit 1
D83 Alarm Value Lower Limit 1
D84 Alarm Value 2
D85 Alarm Value Upper Limit 2
D86 Alarm Value Lower Limit 2
D87 Heater Burnout Detection 1
D88 Process Value Input Shift
D89 SP Ramp Set Value
E5@D Digital Temperature Controllers Communications Manual (H225)
Value (E5CD default settings)
1 (0001 hex)
0 (0000 hex)
0 (0000 hex)
80 (0050 hex)
233 (00E9 hex)
40 (0028 hex)
0 (0000 hex)
0 (0000 hex)
0 (0000 hex)
0 (0000 hex)
0 (0000 hex)
0 (0000 hex)
0 (0000 hex)
0 (0000 hex)
0 (0000 hex)