Operator Control- And Open-Loop Control Possibilities; Block Diagram - Siemens SIMOVERT FC Operating Instructions Manual

Description
1.3

Operator control- and open-loop control possibilities

The unit can be controlled via
♦ the parameterization unit (PMU)
♦ an optional operator control panel (OP1)
♦ terminal strip
♦ a serial interface.
When networked with automation systems, the unit open-loop control is realized via optional interfaces and
technology boards.
1.4

Block diagram

DC link -
C / L+
connection
D / L -
U1/L1
Supply-
V1/L2
connection
W1/L3
PE1
Fig. 1.1 Block diagram
1-4
Terminal strip
Option boards-
in the elec-
tronics box
CU P
SIMOVERT MASTER DRIVES
PMU
Connector for OP1
(serial interface)
U2/T1
Motor-
V2/T2
connection
W2/T3
PE2
Siemens AG 6SE7087-6AH70
Operating Instructions
08.96