Table 18 Network > WAN > More Connections: Edit: Advanced Setup (continued)
LABEL
Generic Filter
Back
Apply
Cancel
6.4 The WAN Backup Setup Screen
Use this screen to configure your P-79X's WAN backup. Click Network > WAN > WAN Backup
Setup. This screen is not available if you set the WAN type to Ethernet in the Internet Access
Setup screen.
Note: This screen is not available when you use the P-791R v3 device.
Figure 34 Network > Internet (WAN) > WAN Backup
Chapter 6 WAN Setup
DESCRIPTION
Select the generic filter(s) to control outgoing traffic. You may choose up
to 4 sets of filters.
You can configure generic filters in the Packet Filter screen. See
12 on page 119
for more details.
Click this to return to the previous screen without saving.
Click this to save your changes.
Click this to restore your previously saved settings.
P-79X Series User's Guide
57
Chapter