Connection Test; View Serial Number; Compile Time; View Installed Board - Lightware MMX4x2-HDMI User Manual

   
6. LW2 Programmers' Reference
6.3.4. Connection Test
Simple test to see if the connection is established successfully.
Command and Response
 {PING}
 (PONG!)CrLf
Example
 {ping}
 (PONG!)
6.3.5. View Serial Number
The device responds its 8-digit serial number.
Command and Response #serialnumber
 {S}
 (SN:<SERIAL_N>)CrLf
Example
 {s}
 (SN:5A004254)
The serial number structure can be found in the
6.3.6. Compile Time
Returns the date, when the CPU firmware was compiled.
Command and Response
 {CT}
 (Complied: <DATE&TIME>)CrLf
Example
 {ct}
 (Compiled: Sep 30 2016 14:07:56)
About the Serial Number section.
Applied firmware package: v1.5.0b8 | LDC software: v2.3.0b1
MMX4x2 series – User's Manual
6.3.7. View Installed Board
Shows the hardware name and revision of the installed cards.
Command and Response
 {IS}
 (SL#·0·<MB_DESC>)CrLf
 (SL·END)CrLf
Example
 {is}
 (SL# 0 MMX4x2-HT200 V12_DAA0)
 (SL END)
The device reports its motherboard (slot 0).
6.3.8. View Firmware for All Controllers
Shows the firmware versions of all installed controllers.
Command and Response
 {FC}
 (CF·<DESC>)CrLf
 (CF·<DESC>)CrLf
 ...
 (CF END)CrLf
Example
 {fc}
 (CF MMX4x2-HT200 1.3.4b3)
 (CF END)
The device has one control panel.
6.3.9. Restart the Device
The device can be restarted without unplugging power.
Command and Response #reboot #restart
 {RST}

Example
 {rst}

The device reboots; no response is sent in this case.
62