Lightware MMX4x2-HDMI User Manual page 110

   
7. LW3 Programmers' Reference
Power Switch Delay
SET·/MEDIA/USB/USBSWITCH.DelayedSwitch=<delay_state>
ç
Querying the Host Presence
GET·/MEDIA/USB/USBSWITCH.<host_pc>
ç
Setting the 5V Sending to the USB Peripherals
SET·/MEDIA/USB/USBSWITCH.<device_pwr>
ç
Querying the 5V Overcurrent State of a USB Peripheral
GET·/MEDIA/USB/USBSWITCH.<device_cur>
ç
EDID Management
Query the Emulated EDIDs
ç GET·/EDID.EdidStatus
Query the Validity of a Dynamic EDID
ç GET·/EDID/D/D1.Validity
Query the Preferred Resolution of a User EDID
ç GET·/EDID/U/<user_edid>.PreferredResolution
Emulating an EDID to an Input Port
ç CALL·/EDID:switch(<source>:<destination>)
Emulating an EDID to All Input Ports
ç CALL·/EDID:switchAll(<source>)
Copy an EDID to User Memory
ç CALL·/EDID:copy(<source>:<destination>)
Deleting an EDID from User Memory
ç CALL·/EDID:delete(<user_edid>)
Resetting the Emulated EDIDs
ç CALL·/EDID:reset()
MMX4x2 series – User's Manual
Applied firmware package: v1.5.0b8 | LDC software: v2.3.0b1
110