Sending A Udp Text (Ascii-Format); Sending A Udp Binary Message (Hex-Format) - Lightware MMX4x2-HDMI User Manual

   
7. LW3 Programmers' Reference
7.9.5. Sending a UDP Text (ASCII-format)
The command is for sending a text message in ASCII-format via UDP-protocol. This method does not allow
escaping or inserting control characters.
Command and Response
ç CALL·/MEDIA/ETHERNET:udpText(<IP_address>:<port_no>=<text>)
æ mO·/MEDIA/ETHERNET:udpText
Example
ç CALL /MEDIA/ETHERNET:udpText(192.168.0.20:9988=open)
æ mO /MEDIA/ETHERNET:udpText
The 'open' text is sent to the indicated IP:port address.
7.9.6. Sending a UDP Binary Message (HEX-format)
The command is for sending a binary message in Hexadecimal format via UDP protocol. This method does
not allow escaping or inserting control characters.
Command and Response
ç CALL·/MEDIA/ETHERNET:udpBinary(<IP_address>:<port_no>=<HEX_message>)
æ mO·/MEDIA/ETHERNET:udpBinary
Example
ç CALL /MEDIA/ETHERNET:udpBinary(192.168.0.20:9988=433030)
æ mO /MEDIA/ETHERNET:udpBinary
The '433030' message is sent to the indicated IP:port address.

INFO: There is no need to insert a space or other separator character between the binary messages.
MMX4x2 series – User's Manual
Applied firmware package: v1.5.0b8 | LDC software: v2.3.0b1
92