Lightware MMX4x2-HDMI User Manual page 35
Standalone multimedia matrix switcher
Hide thumbs
Also See for MMX4x2-HDMI:
- User manual (98 pages) ,
- Quick start manual (2 pages) ,
- User manual (172 pages)
Table of Contents
Advertisement
5. Software Control - Lightware Device Controller
Step 3. Select the unit from the discovered Ethernet devices or under Serial devices; when the device is
connected through RS-232 click on the Query button next to the desired serial port to display the
device's name and serial number. Double click on the transmitter or select the device and click on the
Connect button.
ATTENTION!
Before the device is connected via the local RS-232 port, make sure that Control mode and
LW3 protocol are set on the serial port.
Serial devices tab in LDC
USB tab in LDC
Applied firmware package: v1.5.0b8 | LDC software: v2.3.0b1
MMX4x2 series – User's Manual
35
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the MMX4x2-HDMI and is the answer not in the manual?