Clear Snmp Trap Command; Clear Vlan Command - Avaya P333R-LB User Manual

Chapter 5 Cajun Campus CLI – Layer 2
Example:
To delete the route table entries using the clear ip route command:
P330-N# clear ip route 134.12.3.0 192.1.1.1
Route deleted.

Clear snmp trap Command

Use the clear snmp trap command to clear an entry from the SNMP trap
receiver table.
The syntax for this command is:
clear snmp trap {<rcvr_addr>|all}
rcvr_addr
all
Example:
P330-N# clear snmp trap 192.122.173.82
SNMP trap receiver deleted.

Clear vlan Command

Use the clear vlan command to delete an existing VLAN and return ports from
this VLAN to the default VLAN #1. When you clear a VLAN, all ports assigned to
that VLAN are assigned to the default VLAN #1.
The syntax for this command is:
clear vlan <vlan-id>[name <vlan_name>]
vlan_id
vlan_name
Example:
This example shows how you can delete an existing VLAN (VLAN 5) from a
management domain:
P330-N# clear vlan 5 name V5
This command will assign all ports on vlan 5 to their default
in the entire management domain
- do you want to continue (Y/N)?
88
IP address or IP alias of the trap receiver (the SNMP management
station) to clear.
Keyword that specifies every entry in the SNMP trap receiver table
Number of the VLAN (range is 1to 3071).
VLAN name
y
Avaya P333R-LB User's Guide