Configuring More Settings - HIKVISION EKI-K82T46 User Manual

2. Select the SNMP tab to enter the
3. Check the SNMP checkbox to enable this feature.
4. The enabling of SNMP
5. If you choose the Yes option in step 4, configure the following
Trap Address: IP Address of
•
Trap Port: Port of
•
6. Click the Apply button to save and exit the interface.
NOTE: Before setting the SNMP, download the
information via
alarm event and exception message to the surveillance center.
11.2.6

Configuring More Settings

1. Enter the Network Settings interface, Menu > Configuration > Network.
2. Select the More Settings tab to enter the More Settings interface.
3. Configure the remote alarm host, server port, HTTP port, multicast, and RTSP port.
Alarm Host IP/Port: With a remote alarm host configured, the device will send the alarm event or
•
exception message to the host when an alarm is triggered. The remote alarm host must have the
CMS (Client Management System) software installed.
NVR User Manual 061220NA
SNMP Settings interface.
Figure 177,
may cause security problems. Click Yes to continue or No to cancel operation.
Figure 178,
SNMP host
SNMP host
SNMP port. By setting the Trap Address, the NVR is allowed to send the
Figure 179, More Settings Interface
SNMP Settings Interface
SNMP Settings Interface
SNMP
SNMP software and manage to receive the device
settings:
124