Configuring Hdd Group For Recording - HIKVISION EKI-K82T46 User Manual

3) Select Camera you want to configure in the drop-down list.
4) Check the checkbox of Redundant Record/Capture.
5) Click OK to save settings and back to the upper level menu. Repeat the above steps to configure
other channels.
5.9

Configuring HDD Group for Recording

Purpose
You can group the HDDs and save the record files and captured pictures in certain HDD groups.
1. Enter HDD setting interface, Menu > HDD.
2. Select Advanced on the left side menu.
3. Check if the storage mode of the HDD is Group. If not, set it to Group. For detailed information, refer to
Managing HDD Group.
4. Select General in the left side menu S
5. Click to enter editing interface.
6. Configuring HDD group.
1) Choose a group number for the HDD group.
NVR User Manual 061220NA
Figure 92, Record Parameters
Figure 93, HDD General
Figure 94, Storage Mode
71