Configuring More Settings - HIKVISION DS-7100NI-K1 Series User Manual

NTP Port: Port of NTP server.
Click Apply to save and exit the interface.
The time synchronization interval can be set from1 to 10080min, and the default
value is 60min. If the NVR is connected to a public network, you should use a NTP
server that has a time synchronization function, such as the server at the National
Time Center (IP Address: 210.72.145.44). If the NVR is setup in a more customized
network, NTP software can be used to establish a NTP server used for time
synchronization.

Configuring More Settings

Go to Menu > Configuration > Network.
Select the More Settings tab to enter the More Settings interface.
Configure the remote alarm host, server port, HTTP port, multicast, RTSP port.
Alarm Host IP/Port: With a remote alarm host configured, the device will send the
alarm event or exception message to the host when an alarm is triggered. The
remote alarm host must have the CMS (Client Management System) software
installed.
The Alarm Host IP refers to the IP address of the remote PC on which the CMS
(Client Management System) software (e.g., iVMS-4200) is installed, and the Alarm
Host Port must be the same as the alarm monitoring port configured in the software
(default port is 7200).
Multicast IP: The multicast can be configured to realize live view for more than the
maximum number of cameras through network. A multicast address spans the
Class-D IP range of 224.0.0.0 to 239.255.255.255. It is recommended to use the IP
address ranging from 239.252.0.0 to 239.255.255.255.
When adding a device to the CMS (Client Management System) software, the
multicast address must be the same as the device's multicast IP.
RTSP Port: The RTSP (Real Time Streaming Protocol) is a network control protocol
designed for use in entertainment and communications systems to control streaming
media servers.
Enter the RTSP port in the text field of RTSP Port. The default RTSP port is 554, and
you can change it according to different requirements.
Network Video Recorder User Manual
More Settings Interface
113