10. If necessary, select
11. Set
PTZ
linking parameters and click OK to complete the settings of the alarm input.
NOTE:
Make sure the connected
12. If you want to set handling action of another alarm input, repeat the above steps or click the Copy
button on the Alarm Input Setup interface and check the checkbox of alarm inputs to copy the
settings to them.
8.3
Detecting Video Loss Alarm
Purpose
Detect video loss of a channel and take alarm response action(s).
1. Enter Video Loss interface of Camera Management, and select a channel you want to detect, Menu >
Camera > Video Loss.
NVR User Manual 061220NA
PTZ
Linking tab and set
PTZ
Figure 140, Set
Figure 141, Copy Settings of Alarm Input
PTZ
linkage of the alarm input.
or speed dome supports
PTZ
Linking of Alarm Input
PTZ
linkage.
99