HIKVISION EKI-K82T46 User Manual page 119

Purpose
Hik-Connect is a mobile phone application and service platform page (
and manage your connected DVR. It offers convenient remote access to the surveillance system.
NOTE: Hik-Connect can be enabled via operation on SADP software, GUI, and a Web browser.
We introduce the operation steps on GUI in this section.
1. Go to Menu > Configuration > Network > Platform Access.
2. Check the Enable checkbox to activate the function. The Service Terms interface pops up.
1) Create the verification code and enter the code in the Verification Code text field.
2) Check the Hik-Connect service checkbox, Hik-Connect will require Internet access. Read the
Service Terms and Privacy Statement before enabling the service.
3) Scan the QR code on the interface to read the Service Terms and the Privacy Statement.
4) Click OK to save the settings and return to the Hik-Connect interface.
NOTE: Hik-Connect is disabled by default.
The verification code is empty when the device leaves the factory.
The verification code must contain 6 to 12 letters or numbers and is case sensitive.
Every time you enable Hik-Connect, the Service Terms interface pops up and you should
NVR User Manual 061220NA
Figure 167, Hik-Connect Settings
Figure 168, Service Terms
www.hik-connect.com
) to access
119