Using The Unlock Pattern For Login - HIKVISION EKI-K82T46 User Manual

2. In the IP Camera Activation text field, enter the password to activate the IP camera(s) connected to the
device.
3. Click OK to save the password and activate the device.
4. When the device is activated, the system pops up the message box to remind you to remember the
password. Click Yes to continue to export the GUID file for the future password resetting.
5. Insert the USB flash disk into your device, and export the GUID file to the USB flash disk in the Reset
Password interface. Please see
NOTE: Please keep your GUID file properly for future password resetting.
If the Admin's password is modified, the following menu pops up. Optionally, click the Yes
button to duplicate the password to IP cameras that are connected with the default
protocol.
2.1.3

Using the Unlock Pattern for Login

The Admin user can configure the unlock pattern for device login.
NVR User Manual 061220NA
Figure 8, Export GUID File Remind
Resetting Your Password
Figure 9, Export GUID File
Figure 10, Attention Interface
for password resetting instructions.
21