If you select Auto, the Port Mapping items are read-only, and the external ports are set by the
router automatically.
1) Select Auto in the drop-down list of Mapping Type.
2) Click Apply button to save the settings.
3) You can click Refresh button to get the latest status of the port mapping.
OPTION 2: Manual
•
If you select Manual as the mapping type, you can edit the external port on demand by clicking
to activate the External Port Settings dialog box.
1) Select Manual in the drop-down Mapping Type list.
2) Click
to activate the External Port Settings dialog box. Configure the external port no. for
server port, http port, RTSP port, and https port respectively.
NOTE:
You can use the default port no., or change it according to actual requirements.
External Port indicates the port no. for port mapping in the router.
The value of the RTSP port no. should be 554 or between 1024 and 65535, while the value
of the other ports should be between 1 and 65535 and the values must be different from
each other. If multiple devices are configured for the UPnP™ settings under the same
router, the value of the port no. for each device should be unique.
3) Click the Apply button to save the settings.
4) You can click the Refresh button to get the latest status of the port mapping.
NVR User Manual 061220NA
Figure 188, UPnP™ Settings Finished-Auto
Figure 189, External Port Settings Dialog Box
130