Usb Mouse Operation - HIKVISION EKI-K82T46 User Manual

1. Go to Menu > Settings > General > More Settings by operating the front control panel or the mouse.
2. Check and remember NVR ID#. The default ID# is 255. This ID# is valid for all the
3. Press the DEV button on the remote control.
4. Enter the NVR ID# you set in step 2.
5. Press the ENTER button on the remote.
NOTE: If the Status indicator on the front panel turns blue, the remote control is operating
properly. If the Status indicator does not turn blue and there is still no response from the
remote, please check the following:
•
•
•
•
•
1.3

USB Mouse Operation

A regular 3-button (Left/Right/Scroll-wheel) USB mouse can also be used with this NVR. To use a USB
mouse:
1. Plug USB mouse into one of the USB interfaces on the front panel of the NVR.
2. The mouse should automatically be detected. If the mouse is not detected, the possible reason may
be that the two devices are not compatible, refer to the recommended device list from your provider.
Table 1-5 Description of the Mouse Control
Name Action
Single-Click
Double-Click
Left-Click
Click and Drag
Right-Click Single-Click
Scrolling Up
Scroll-Wheel
Scrolling Down
NVR User Manual 061220NA
Batteries are installed correctly and the polarities of the batteries are not reversed.
Batteries are fresh and not out of charge.
IR receiver is not obstructed.
No fluorescent lamp is used nearby
If the remote still can't function properly, change the remote and try again, or
contact the device provider.
Description
Live View: Select channel and show the quick set menu
Menu: Select and enter
Live View: multi-screen
Switch between single-screen and multi-screen
PTZ Control: pan, tilt, and zoom
Video tampering, privacy mask, and
Digital Zoom-in: Drag and select target area
Live View: Drag channel/time bar
Live View: Show menu
Menu: Exit current menu to upper level menu
Live View: Previous screen
Menu: Previous item
Live View: Next screen
Menu: Next item
motion detection: Select target area
IR Remote controls.
17