HIKVISION EKI-K82T46 User Manual page 16

Table 1-4 IR Remote Functions
No. Name
•
To Turn Power On:
- If User Has Not Changed the Default NVR Device ID# (255):
1. Press Power On/Off button (1).
- If User Has Changed the NVR Device ID#:
1. Press DEV button.
2. Press Number buttons to enter user-defined Device ID#.
3. Press Enter button.
4. Press Power button to start device.
• To Turn NVR Off:
- If User Is Logged On:
1. Hold Power On/Off button (1) down for five seconds to display the "Yes/No" verification prompt.
2. Use Up/Down Arrow buttons (12) to highlight desired selection.
POWER
1 3. Press Enter button (12) to accept selection.
ON/OFF
- If User Is
1. Hold Power On/Off button (1) down for five seconds to display the user name/password prompt.
2. Press the Enter button (12) to display the on-screen keyboard.
3. Input the user name.
4. Press the Enter button (12) to accept input and dismiss the on-screen keyboard.
5. Use the Down Arrow button (12) to move to the "Password" field.
6. Input password (use on-screen keyboard or numeric buttons (3) for numbers).
7. Press the Enter button (12) to accept input and dismiss the on-screen keyboard.
8. Press the OK button on the screen to accept input and display the Yes/No" verification prompt (use
9. Press Enter button (12) to accept selection.
User name/password prompt depends on NVR is configuration. See "System Configuration" section.
Enable
2 DEV
Disable
Switch to the corresponding channel in Live View or
3 Numerals
Input numbers in Edit mode
Delete characters before cursor
4 EDIT
Check the checkbox and select the ON/OFF switch
Adjust focus in the
5 A
Switch on-screen keyboards (upper and lower case alphabet, symbols, and numerals)
Enter Manual Record setting menu
6 REC Call a
Turn audio on/off in Playback mode
Go to Playback mode
7 PLAY
Auto scan in the
8 INFO Reserved
9 VOIP Switches between main and spot output Zooms out the image in
Return to Main menu (after successful login)
10 MENU N/A
Show/hide full screen in Playback mode
Navigate between fields and menu items
Use Up/Down buttons to speed up/slow down recorded video, and Left/Right buttons to advance/rewind 30 secs
in Playback mode
DIRECTION
Cycle through channels in Live View mode
Control
12
Confirm selection in any menu mode
Checks checkbox
Play or pause video in Playback mode
ENTER
Advance video a single frame in single-frame Playback mode
Stop/start auto switch in auto-switch mode
13 PTZ Enter
Go back to previous screen
14 ESC
N/A
15 RESERVED Reserved
Select all items on a list
16 F1 N/A
Switch between play and reverse play in Playback mode
Adjust
17 PTZ Control
Cycle through tab pages
18 F2
Switch between channels in Synchronous Playback mode
Troubleshooting Remote Control
Make sure you have installed batteries properly in the remote control, and you have to aim the remote
control at the IR receiver in the front panel.
If there is no response after you press any button on the remote, follow the procedure below to
troubleshoot.
NVR User Manual 061220NA
Not
Logged On:
Up/Down Arrow buttons (12) to move between fields)
IR Remote: Press DEV button, enter NVR Device ID# with number keys, press Enter to pair unit with the NVR
IR Remote: Press DEV button to clear Device ID#; unit will no longer be paired with the NVR
PTZ Control menu
PTZ preset by using the numeric buttons in
PTZ Control menu
PTZ camera movement in PTZ
PTZ Control mode
PTZ camera iris, focus, and zoom
Function Description
PTZ Control mode
PTZ control settings
PTZ
control mode
control mode
16