Pir Alarm; Chapter 10 Search; Face Search - HIKVISION EKI-K82T46 User Manual

The Sensitivity in the Rule Settings ranges from 1 to 100, and the higher the value, the
more easily the
9.11

PIR Alarm

Purpose
A PIR (Passive Infrared) alarm is triggered when an intruder moves within the detector's field of view. The
heat energy dissipated by a person, or any other warm blooded creature such as dogs, cats, etc., can be
detected.
1. Enter the VCA settings interface, Menu > Camera > VCA.
2. Select the camerafor which to configure the VCA.
3. (Optional) Click the Save
4. Set the VCA detection type to
5. Click to configure the trigger channel, arming schedule, and linkage action for the
6. Click the Rule Settings button to set the rules. Refer to
7. Click Apply to activate the settings.
Chapter 10 VCA
With the configured VCA
people counting, and
10.1

Face Search

Purpose
When there are detected face picture captured and saved in the HDD, you can enter the
interface to search for pictures and play the picture related video file according to the specified
conditions.
Before You Start
Face Detection
Refer to
1. Enter the
Face Search
2. Select the camera(s) for the face search.
NVR User Manual 061220NA
defocus image can trigger the alarm.
Picture checkbox to save the captured
VCA
PIR Alarm.
Search
detection, the NVR supports
heat map results.
for configuring face
interface, Menu >
Face Detection
VCA search for the behavior analysis, face capture,
detection.
VCA Search > Face Search.
VCA detection pictures.
PIR
for instructions.
Face Search
alarm.
114