Customizing Patrols - HIKVISION EKI-K82T46 User Manual

3. Click the button to show the general settings of the PTZ control.
Figure 58, PTZ Panel−General
4. Click to enter the preset no. in the corresponding text field.
5. Click the Call Preset button to call it.
4.2.3

Customizing Patrols

Purpose
Patrols can be set to move the PTZ to different key points and have it stay there for a set duration before
moving on to the next key point. Key points correspond to the presets. The presets can be set following
the steps above in Customizing Presets.
1. Enter the PTZ Control interface, Menu > Camera > PTZ.
Figure 59, PTZ Settings
2. Select patrol no. in the drop-down list of patrols.
3. Click the Set button to add key points for the patrol.
NVR User Manual 061220NA 51