Configuring Redundant Recording - HIKVISION EKI-K82T46 User Manual

5.8 Configuring
Purpose
Enabling redundant recording, which means saving the record files and captured pictures not only in the
R/W HDD, but also in the redundant HDD, to effectively enhance the data safety and reliability.
1. Enter the HDD Information interface, Menu > HDD.
2. Select the HDD and click
1) Set the HDD property to Redundancy.
2) Click Apply to save the settings.
3) Click OK to go back to the upper level menu.
NOTE: You must set the Storage mode in the HDD advanced settings to Group before you set
the HDD property to Redundant. For detailed information, refer to
There should be at least another HDD that is in Read/Write status.
3. Enter the Record setting interface, Menu > Record > Parameters.
1) Select Record tab.
2) Click More Settings to enter the following interface.
NVR User Manual 061220NA
Redundant Recording
Figure 90, HDD General
to enter the Local HDD Settings interface.
Figure 91, HDD General−Editing
Setting HDD Property
.
70