HIKVISION EKI-K82T46 User Manual page 159

Password: Set the password for the user account.
•
STRONG PASSWORD RECOMMENDED − We highly recommend that you create a strong password
of your own choosing (using a minimum of eight characters, including at least three of the
following categories: upper case letters, lower case letters, numbers, and special
characters) in order to increase the security of your product. We also recommend that you
reset your password regularly. Especially in high security systems, resetting the password
monthly or weekly can better protect your product.
Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
Level: Set the user level to Operator or Guest. Different user levels have different operating
•
permission.
Operator: The Operator user level has permission for Two-way Audio in Remote Configuration
-
and all operating permissions in Camera Configuration by default.
Guest: The Guest user has no permission for Two-way Audio in Remote Configuration and only
-
has the local/remote playback in the Camera Configuration by default.
User's MAC Address: The MAC address of the remote PC that logs onto the NVR. If it is configured
•
and enabled, it allows only the remote user with this MAC address to access the NVR.
4. Click the OK button to save the settings and go back to the User Management interface. The added
new user will be displayed on the list.
5. Select the user from the list and then click the
NVR User Manual 061220NA
Figure 246, Added User Listed in User Management Interface
button to enter the Permission settings interface.
159