Region Entrance Detection - HIKVISION EKI-K82T46 User Manual

region and occupies half of the whole region, the alarm is triggered.
3) Click-OK to save the rule settings and go back to the
8. Click and draw a quadrilateral in the preview window by specifying four vertexes of the detection
region, and right click to complete drawing. Only one region can be configured.
9. (Optional) You can use
Up to four rules can be configured.
NOTE:
10. Click Apply to save the settings.
9.4

Region Entrance Detection

Purpose
Region entrance detection
virtual region from an outside area, and certain actions can be taken when the alarm is triggered.
1. Enter the VCA settings interface, Menu > Camera > VCA.
2. Select the camera for which to configure the VCA.
NVR User Manual 061220NA
Figure 157, Set Intrusion Crossing Detection Rules
to clear the existing virtual line and re-draw it.
Figure 158, Draw Area for
function detects people, vehicles, or other objects that enter a pre-defined
line crossing detection
Intrusion Detection
settings interface.
110