Configuring Poe Interface - HIKVISION EKI-K82T46 User Manual

Manual: You can disable the PoE interface by selecting Manual while the current channel can be
•
used as a normal channel and the parameters can also be edited.
Input the IP address, the user name, and password of administrator manually, and click OK to add
the IP camera.
2.3.5

Configuring PoE Interface

NOTE: This chapter is applicable only for /P Series NVRs.
When it requires long-distance PoE transmission (100 to 300 m), you can configure the PoE channel to the
long network cable mode.
1. Enter the PoE Configuration interface, Menu> Camera > Camera > PoE Configuration.
NVR User Manual 061220NA
Figure 42, Edit IP Camera Interface − Plug-and-Play
Figure 43, Edit IP Camera Interface - Manual
40