Table of Contents
Advertisement
Figure 200, Network Stat. Interface
3. Check the bandwidth of IP Camera, bandwidth of Remote Live View, bandwidth of Remote Playback,
bandwidth of Net Receive Idle, and bandwidth of Net Send Idle.
4. You can click Refresh to get the newest status.
Chapter 12 HDD Management
12.1
Initializing HDDs
Purpose
A newly installed hard disk drive (HDD) must be initialized before it can be used with your NVR.
NOTE:
A message box pops up when the NVR starts up if there exits any uninitialized HDDs.
Figure 201, Message Box of Uninitialized HDD
1. Click Yes button to initialize it immediately or perform the following steps to initialize the HDD.
2. Enter the HDD Information interface, Menu > HDD> General.
Figure 202, HDD Information Interface
3. Select athe HDD to be initialized.
4. Click the Init button.
NVR User Manual 061220NA
135
Hide quick links:
Advertisement
Table of Contents
