Unpairing (Disabling) An Ir Remote From An Nvr - HIKVISION EKI-K82T46 User Manual

2. Type a number (255 digits maximum) into the Device No. field.
3. On the IR Remote:
4. Press the DEV button.
5. Use the Number buttons to enter the Device ID# that was entered into the NVR.
6. Press Enter button to accept the new Device ID#.
1.2.2 Unpairing (Disabling) an
To unpair an IR Remote
Press the DEV key on the
will no longer function with the NVR.
NOTE: (Re)-enabling the
Specific NVR (optional)," above.
The keys on the remote control closely resemble the ones on the front panel.
NVR User Manual 061220NA
Figure 2, Remote Control
IR Remote
from a NVR so that the unit cannot control any NVR functions, proceed as follows:
IR Remote. Any existing Device ID# will be erased from the unit's memory and it
IR Remote
from an NVR
requires pairing to a NVR. See "Pairing the IR Remote to a
15