HIKVISION EKI-K82T46 User Manual page 29

8. To initialize the HDD, click the Init button. Initialization removes all data saved on the HDD.
9. Click the Next button to enter the Adding IP Camera interface.
10. Click Search to search for online IP cameras, and the Security status shows whether it is active or
inactive. Before adding the camera, make sure the IP camera to be added is in active status.
11. If the camera is in inactive status, you can click the inactive icon of the camera to set the password to
activate it. You can also select multiple cameras from the list and click the One-touch Activate to
activate the cameras in batch.
12. Click Add to add the camera.
If you check the Enable H.265 checkbox, the NVR can automatically switch to the H.265 stream of IP
cameras that support the H.265 video format for the initial access.
13. Click the Next button. Configure the recording for the added IP cameras.
NVR User Manual 061220NA
Figure 25, HDD Management
Figure 26, Search for IP Cameras
29