Front Panel Operation On Live View; Using The Mouse In Live View - HIKVISION EKI-K82T46 User Manual

3.2.1

Front Panel Operation on Live View

Table 3-2 Front Panel Operation in Live View
Functions
Show Single Screen
Show Multi-Screen
Manually Switch Screens
Auto-Switch
Playback
Switch Between Main
and Aux Output
3.2.2

Using the Mouse in Live View

Table 3-3 Mouse Operation in Live View
Name
Common Menu
Menu
Single Screen
Multi-screen
Previous Screen
Next Screen
Start/Stop Auto-Switch
Start Recording
Add IP Camera
Playback
PTZ
Output Mode
Aux Monitor
NOTE: The
If you enter Aux monitor mode and the Aux monitor is not connected, the mouse
operation is disabled; you need to switch back to the Main output with the MAIN/AUX
button on the front panel or remote.
If the corresponding camera supports intelligent function, the Reboot Intelligence option is included
when right-clicking mouse on this camera.
NVR User Manual 061220NA
Front Panel Operation
Press the corresponding alphanumeric button. E.g. Press 2 to display only the screen for channel 2
Press the PREV/FOCUS button
Next screen: right/down direction button. Previous screen: left/up direction button
Press Enter button
Press Play button
Press Main/Aux button
Description
Quick access to the sub-menus which you frequently visit
Enter the main menu of the system by right clicking the mouse
Switch to the single full screen by choosing channel number from the drop-down list
Adjust the screen layout by choosing from the drop-down list
Switch to the previous screen
Switch to the next screen
Enable/disable the auto-switch of the screens
Start continuous recording or
Enter the IP Camera Management interface, and manage the cameras
Enter the playback interface and start playing back the video of the selected channel
immediately
Enter the PTZ control interface
Four modes of output supported, including Standard, Bright, Gentle, and Vivid
Switch to the auxiliary output mode and the operation for the main output is disabled
dwell time
of the live view configuration must be set before using Start Auto-switch.
Figure 45, Right-Click Menu
motion detection recording of all channels
43