Chapter 5 Recording Settings; Configuring Parameters - HIKVISION EKI-K82T46 User Manual

Table 4-1 Description of the
Icon
Description
Direction button and the
auto-cycle button
The speed of the
movement
3D Positioning
Switch to the
interface
Previous item
Stop the patrol/pattern
movement

Chapter 5 Recording Settings

5.1

Configuring Parameters

Purpose
By configuring the parameters you can define the parameters that affect the image quality such as the
transmission stream type, the resolution, etc.
Before You Start
Make sure that the HDD has already been installed. If not, please install an HDD and initialize it (Menu >
1.
HDD > General.)
2. Click Advanced to check the storage mode of the HDD.
If the HDD mode is
•
detailed information, see
NVR User Manual 061220NA
Figure 67,
PTZ panel icons
Icon
PTZ
PTZ control
Figure 68, HDD−General
Quota
, set the maximum record capacity and maximum picture capacity. For
Configuring Quota Mode.
PTZ Panel
Description
Zoom+, Focus+, Iris+
Light on/off
Image Centralization
Switch to the one-touch
control interface
Next item
Exit
Icon Description
Zoom-, Focus-, Iris-
Wiper on/off
Menu
Switch to the general
settings interface
Start pattern/ patrol
Minimize windows
57