Managing Network Hdd - HIKVISION EKI-K82T46 User Manual

Figure 203, Confirm Initialization
5. Select the OK button to start initialization.
Figure 204, Status changes to Initializing
Uninitialized Normal
6. After the HDD has been initialized, the status of the HDD will change from to .
Figure 205, HDD Status Changes to Normal
Initializing the HDD will erase all data on it.
NOTE:
12.2

Managing Network HDD

Purpose
You can add an allocated NAS or IP SAN disk to the NVR and use it as a network HDD. Up to eight network
disks can be added.
1. Enter the HDD Information interface, Menu > HDD > General.
Figure 206, HDD Information Interface
2. Click the Add button to enter the Add NetHDD interface.
NVR User Manual 061220NA 136