2. Configure the detection rules for
3. Click the
icon to configure the alarm linkage actions for the
4. Select Trigger Channel tab, and select one or more channels which will start to record when
is triggered.
5. Click Apply to save the settings
NOTE:
The
6. Enter Record Schedule settings interface (Menu > Record > Schedule > Record Schedule), and then set
VCA
as the record type. For details, see step 2 in
5.6
Manual Recording
Purpose
Follow the steps to set parameters for the manual recording and continuous capture. Using manual
NVR User Manual 061220NA
Figure 85,
VCA
events. For details, refer to
Figure 86, Set Trigger Camera of
PTZ
Linking function is available only for the
VCA
Settings
VCA
Alarm
VCA
events.
VCA
Alarm
VCA
settings of IP cameras.
Configuring Recording Schedule.
.
VCA
alarm
67