Calling Patrols - HIKVISION EKI-K82T46 User Manual

4. Configure key point parameters such as the key point no., duration of staying at one key point, and
patrol speed. The key point corresponds to the preset. The Key Point No. determines the order in which
the PTZ will follow while cycling through the patrol. Duration refers to the time span to stay at the
corresponding key point. Speed defines the speed at which the
next.
5. Click the Add button to add the next key point to the patrol, or you can click the OK button to save the
key point to the patrol.
You can delete all the key points by clicking the Clear button for the selected patrol, or click the Clear All
button to delete all the key pints for all patrols.
4.2.4

Calling Patrols

Purpose
Calling a patrol causes the
1. Click the button in the lower-right corner of the
PTZ
the front panel, or click the
right-click menu to show the
2. Click the button to show the general settings of the
3. Select a patrol in the drop-down list, and click the Call Patrol button to call it.
4. You can click the Stop Patrol button to stop calling it.
NVR User Manual 061220NA
Figure 60, Key Point Configuration
PTZ to move according the predefined patrol path.
PTZ Control icon
PTZ control panel.
Figure 61,
PTZ
PTZ setting interface, or press the
in the quick setting bar, or select the
PTZ control.
PTZ Panel−General
will move from one key point to the
PTZ
PTZ
button on
option in the
52