Configuring Hdd Error Alarms - HIKVISION EKI-K82T46 User Manual

You can click Error info button to see the detailed damage information. You can also pause/resume or
cancel the detection.
12.8

Configuring HDD Error Alarms

Purpose
You can configure the HDD error alarms when the HDD status is
1. Enter the Exception interface, Menu > Configuration > Exceptions.
2. Set the Exception Type to HDD Error from the drop-down list.
3. Click the checkbox(es) below to select the HDD error alarm type(s).
The alarm type can be selected as: Audible Warning, Notify Surveillance Center, Send E-
NOTE:
mail and Trigger Alarm Output. Refer to
4. When the Trigger Alarm Output is selected, you can also select the alarm output to be triggered from
NVR User Manual 061220NA
Figure 226, Click the Detect Button To Start the Detection.
Figure 227, Configure HDD Error Alarm
Uninitialized
or
Setting Alarm Response Actions
Abnormal
.
.
146