Step 3 Check the SNMP checkbox to enable this feature.
Step 4 The enabling of SNMP may cause security problems. Click Yes to continue or No to cancel
the operation.
Step 5 When you choose the Yes option in step4, configure the following SNMP settings:
Trap Address: IP Address of SNMP host.
Trap Port: Port of SNMP host.
Step 6 Click the Apply button to save and exit the interface.
Before setting the SNMP, please download the SNMP software and manage to receive the device
information via SNMP port. By setting the Trap Address, the NVR is allowed to send the alarm
event and exception message to the surveillance center.
12.2.5 Configuring More Settings
Step 1 Enter the Network Settings interface.
Menu >
Configuration
Step 2 Select the More Settings tab to enter the More Settings interface.
Step 3 Configure the remote alarm host, server port, HTTP port, multicast, RTSP port.
Network Video Recorder User Manual
Figure 12-9 SNMP Settings Interface
Figure 12-10 SNMP Settings Interface
> Network
Figure 12-11 More Settings Interface
202