3. Click Apply to save the settings.
4. Select the E-mail tab to enter the E-mail Settings interface.
5. Configure the following e-mail settings:
Enable Server Authentication (optional): Check the checkbox to enable the server authentication
•
feature
User Name: The user name of sender's account registered on the SMTP server
•
Password: The password of sender's account registered on the SMTP server
•
SMTP Server: The SMTP Server IP address or host name (e.g., smtp.263xmail.com)
•
SMTP Port: The SMTP port, the default TCP/IP port used for SMTP is 25
•
Enable SSL/TLS (optional): Click the checkbox to enable SSL/TLS if required by the SMTP server.
•
Sender: The name of sender
•
Sender's Address: The e-mail address of sender
•
Select Receivers: Select the receiver; up to three receivers can be configured
•
NVR User Manual 061220NA
Figure 185, Network Settings Interface
Figure 186, E-Mail Settings Interface
128