HIKVISION EKI-K82T46 User Manual page 4

In the use of the product, you must be in strict compliance with the electrical safety regulations of the
•
nation and region. Please refer to technical specifications for detailed information.
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with
•
100 to 240 VAC or 12 VDC according to the IEC60950-1 standard. Please refer to technical
specifications for detailed information.
Do not connect several devices to one power adapter as adapter overload may cause overheating or a
•
fire hazard.
Please make sure that the plug is firmly connected to the power socket.
•
If smoke, odor, or noise rise from the device, turn off the power at once and unplug the power cable,
•
and then please contact the service center.
Preventive and Cautionary Tips
Before connecting and operating your device, please be advised of the following tips:
Ensure unit is installed in a well-ventilated, dust-free environment.
•
Unit is designed for indoor use only.
•
Keep all liquids away from the device.
•
Ensure environmental conditions meet factory specifications.
•
Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of
•
dropping it may cause damage to the sensitive electronics within the unit.
Use the device in conjunction with a UPS if possible.
•
Power down the unit before connecting and disconnecting accessories and peripherals.
•
A factory recommended HDD should be used for this device.
•
Improper use or replacement of the battery may result in explosion hazard. Replace with the same or
•
equivalent type only. Dispose of used batteries according to the instructions provided by the battery
manufacturer.
When installing the device into a cabinet over 2U height, it is suggested to use a rack shelf to bear the
•
weight. If the cabinet height is over 4U, it is suggested to use slide rails or a rack shelf to bear the
weight.
NVR User Manual 061220NA 4