Configuring Nat - HIKVISION EKI-K82T46 User Manual

Receiver: The name of user to be notified
-
Receiver's Address: The e-mail address of user to be notified
-
Enable Attached Picture: Check the Enable Attached Picture checkbox if you want to send e-mail
•
with attached alarm images. The interval is the time of two adjacent alarm images. You can also set
SMTP port and enable SSL here.
Interval: The interval refers to the time between two actions of sending attached pictures.
•
6. Click the Apply button to save the e-mail settings.
7. You can click the Test button to test whether your e-mail settings work.
11.2.9

Configuring NAT

Purpose
Two ways are provided for port mapping to realize remote access via the cross-segment network, UPnP™
and manual mapping.
TM
UPnP
•
   
Universal Plug and Play (UPnP™) can permit the device seamlessly to discover the presence of other
network devices on the network and establish functional network services for data sharing,
communications, etc. You can use the UPnP™ function to enable fast connection of the device to the
WAN via a router without port mapping.
Before You Start
If you want to enable the device's UPnP™ function, you must enable the UPnP™ function of the router to
which your device is connected. When the network working mode of the device is set as multi-address,
the Default Route of the device should be in the same network segment as that of the LAN IP address of
the router.
1. Enter the Network Settings interface, Menu > Configuration > Network.
2. Select the NAT tab to enter the port mapping interface.
3. Check the checkbox to enable UPnP™.
4. Set the Mapping Type as Manual or Auto in the drop-down list.
OPTION 1: Auto
•
NVR User Manual 061220NA
Figure 187, UPnP™ Settings Interface
129