Configuring E-Mail - HIKVISION EKI-K82T46 User Manual

OPTION 3: Install the available certificate
•
1) Click Browse to locate the certificate file from your local directory.
2) Click Install to install the certificate.
5. There will be the certificate information after you successfully create and install the certificate.
6. Check the checkbox to enable the HTTPS function.
7. Click the Save button to save the settings.
11.2.8

Configuring E-Mail

Purpose
The system can be configured to send an e-mail notification to all designated users if an alarm event is
detected, etc., an alarm or motion event is detected or the administrator password is changed.
Before configuring the e-mail settings, the NVR must be connected to a local area network (LAN) that
maintains an SMTP mail server. The network must also be connected to either an intranet or the Internet
depending on the location of the e-mail accounts to which you want to send notification.
1. Enter the Network Settings interface, Menu > Configuration > Network.
2. Set the IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway, and the Preferred DNS Server in the Network
Settings menu.
NVR User Manual 061220NA
Figure 183, Install Available Certificate
Figure 184, Installed Certificate Property
127