4) Click Apply to save the settings.
5) (Optional) Click the Copy button to copy the stream type settings of the current camera to other
camera(s).
3.4
Channel-Zero Encoding
Purpose
Sometimes you need to get a remote view of many channels in real time from a Web browser or CMS (Client
Management System) software. To decrease the bandwidth requirement without affecting the image
quality, channel-zero encoding is supported as an option.
1. Enter the Live View Settings interface, Menu > Configuration > Live View.
2. Select the Channel-Zero Encoding tab.
3. Check the Enable Channel Zero Encoding checkbox.
4. Configure the Frame Rate, Max. Bitrate Mode, and Max. Bitrate.
After you set the Channel-Zero encoding, you can view in the remote client or Web browser 16 channels
on one screen.
Chapter 4
PTZ
4.1
Configuring
Purpose
Follow these procedures to set the
before you control the
1. Enter the
PTZ
Settings interface, Menu > Camera > PTZ.
NVR User Manual 061220NA
Figure 53, Stream Type Settings
Figure 54, Live View−Channel-Zero Encoding
Controls
PTZ
Settings
PTZ
parameters. The configuring of the
PTZ
camera.
PTZ
parameters should be done
48