2. Set up handling action of video loss.
Check the "Enable Video Loss Alarm" checkbox, and click the
•
video loss.
3. Set up arming schedule of the handling actions.
1) Select Arming Schedule tab to set the channel's arming schedule.
2) Choose one day of the week. Up to eight time periods can be set within each day.
3) Click the Apply button to save the settings.
NOTE:
Time periods cannot repeat or overlap.
4. Select Linkage Action tab to set up alarm response action of video loss (refer to
Response Actions
5. Click the OK button to complete the video loss settings of the channel.
8.4
Detecting
NVR User Manual 061220NA
Figure 142, Video Loss Setup Interface
Figure 143, Set Arming Schedule of Video Loss
).
Video Tampering Alarm
button to set up handling action of
Chapter Setting Alarm
100