Chapter 1 Introduction; Front Panel (Typical); Ir Remote Control Operations; Pairing (Enabling) The Ir Remote To A Specific Nvr (Optional) - HIKVISION EKI-K82T46 User Manual

Chapter 1 Introduction

IMPORTANT!

1.1 Front Panel (Typical)

Table 1-4 Panel Description
No. Name
1 POWER
2 HDD
3 Tx/Rx
Infrared
4
Receiver
5 USB Interface
1.2 IR Remote
The NVR may also be controlled with the included
Batteries (2 × AAA) must be installed before operation.
NOTE:
The IR Remote is set at the factory to control the NVR (using default Device ID# 255) without any additional
steps. Device ID# 255 is the default universal device identification number shared by the NVRs. You may
also pair an IR Remote
1.2.1 Pairing (Enabling) the
You can pair an IR Remote
using multiple IR Remotes
On the NVR:
1. Go to General > More Settings.
NVR User Manual 061220NA
Not all NVRs support all features in this manual.
Some features
Please check your hardware specifications for usage.
Figure 1, Typical Front Panel
Turns white when device is powered up
Flickers white when data is being read from or written to HDD
Flickers white when network connection is functioning properly
Receiver for IR Remote
Universal Serial Bus (USB) port for additional devices such as USB mouse and USB
Hard Disk Drive (HDD)
Control Operations
to a specific NVR by changing the Device ID#, as follows:
IR Remote
to a NVR by creating a user-defined Device ID#. This feature is useful when
and NVRs.
(noted in blue type)
Connections
control
IR Remote control.
to a Specific NVR (optional)
require camera support.
14