HIKVISION EKI-K82T46 User Manual page 58

If the HDD mode is Group, set the HDD group. For detailed information, see
•
for Recording.
3. Enter the Record settings interface to configure the recording parameters: Menu > Record >
Parameters.
4. Set recording parameters
1) Select Record tab page to configure. You can configure the stream type, the resolution, and other
parameters on demand.
Video Encode: Set the video encoding to H.265 or H.264.
•
Enable H.264+ Mode: Check the checkbox to enable. Once enabled, the Max. Bitrate Mode, Max.
•
Bitrate (Kbps) and Max. Bitrate Range Recommend are not configurable. Enabling it helps to
ensure high video quality with a lowered bitrate.
The H.265 and H.264+ should be supported by the connected IP camera.
NOTE:
2) Click the More Settings button to set the advanced parameters for recording, and then click the OK
button to finish editing.
NVR User Manual 061220NA
Figure 69, HDD−Advanced
Figure 70, Recording Parameters
Configuring HDD Group
58