HIKVISION EKI-K82T46 User Manual page 34

2. You can edit the IP camera's IP address, protocol, management port, and other information to be
added.
NOTE: If the IP camera to add has not been activated, you can activate it from the IP camera
list on the camera management interface.
3. (Optional) Check the Continue to Add checkbox to add additional IP cameras.
4. Click Add to add the camera. The successfully added cameras are listed in the interface.
Table 2-1 Description of Icons
Icon Explanation
Edit basic camera parameters
The camera is disconnected; you can
click the icon to get the camera
exception information
Play the live video of the connected
camera
Upgrade the connected IP camera
NOTE: For the added IP cameras, the Security status shows the security level of the camera
password: strong password, weak password, or risky password.
NVR User Manual 061220NA
Figure 33, Custom Adding IP Camera Interface
Icon Explanation
Add the detected IP camera.
Delete the IP camera
Advanced camera settings
Show the security status of the camera
to be active/inactive or the password
Security
strength (strong/medium/weak/risk)
34