Function List And Default Value; Function Classification - Panasonic HL-D3 Series User Manual

Chapter 4 Description of Functions

4-3 Function List and Default Value

4-3-1 Function Classification

Classification
Head setting (A, B)
Setting for each
measurement mode
OUT setting (1, 2, 3)
OUT-OUT calculation
setting
Total judgment setting
4
Shape judgment set-
ting
Common setting
Buffering setting
Detected light intensity
image setting
Operation during
measurement
Controller operation
System setting
Description of function
It is the function setting to select the laser radiation, detec-
tion condition, measurement mode, etc.
Function setting for processing in each measurement mode.
Function setting for processing calculation of output data.
Function setting for the calculation and judgment processes
of multiple OUT calculation results.
Function setting for the logical judgment processing of mul-
tiple OUT calculation judgment results.
Function setting for calculation and judgment of multiple
steps to perform the shape judgment.
Function setting for sensor system, processing of measure-
ment value results and I/O terminals.
Function setting for data buffering.
Function setting for acquisition and display of the detected
light intensity image after setting the laser emission, light
intensity and measurement conditions.
Operation function such as zero set, timing, hold reset, etc.
executed during continuous measurement.
Controller operation functions of the "version check", "load",
"send", "initialize", "save" and etc.
Setting related to plot display method or file saving method
in the HL-D3SMI.
4-18